AVR-Chat

So the chip can actually be powered on, eh?  That explains a few mysterious
things.   Thanks, Steve

 

From: AVR-Chat@yahoogroups.com [mailto:AVR-Chat@yahoogroups.com] On Behalf
Of John Samperi
Sent: Thursday, August 23, 2012 2:30 PM
To: AVR-Chat@yahoogroups.com
Subject: Re: [AVR-Chat] voltage on an AVR pin when powered off

 

  

At 06:21 AM 24/08/2012, you wrote:
>So what happens if there is no Vcc, i.e., there is no supply power 
>applied to the AVR,
>but at the same time there happens to be Vcc on, say, a digital 
>input pin or a UART RX line?

The chip will try and draw power from that line. It's VCC (and the 
boards' VCC) will be the
voltage present at the pin less 0.5V.

So it is never a good idea to have power on pins of a chip which is off.

Regards

John Samperi

********************************************************
Ampertronics Pty. Ltd.
11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA
Tel. (02) 9674-6495
Website http://www.ampertronics.com.au
*Electronic Design * Custom Products * Contract Assembly
********************************************************





[Non-text portions of this message have been removed]