AVR-Chat

On 27 Feb 2008 at 19:34, John Samperi wrote:

> At 06:52 PM 27/02/2008, you wrote:
> >  You can use a parallel
> >port (assuming your PC has one), and a 4 wire cable, wired to a piece of
> >perfboard, or to pins that can
> >\be pligged into your solderless breadboard, for programming.  Dead simple.
> 
> ....which is usually followed by Dead Chip....
> 
> Regards
> John Samperi
> 

	That's not my experience.
	Some years doing exactly that with no problems.

	Mark