At 02:32 PM 15/11/2007, you wrote: >The side that confuses me the most, is the wiring of the pin to the uC >- is it as straight forward as MOSI to MOSI, MISO to MISO, SKT to SKT, >and RST to RST, or is there more to it? Almost correct except for the reset pin. Have a look at the STK500 docs in Studio, it shows how to wire up the connector. It would also help if you tell us which programmer you are using and which chip, not all chips use Miso and Mosi. Regards John Samperi ******************************************************** Ampertronics Pty. Ltd. 11 Brokenwood Place Baulkham Hills, NSW 2153 AUSTRALIA Tel. (02) 9674-6495 Fax (02) 9674-8745 Email: john@ampertronics.com.au Website http://www.ampertronics.com.au *Electronic Design * Custom Products * Contract Assembly ********************************************************
Message
Re: [AVR-Chat] Some confusion over programmers
2007-11-16 by John Samperi