The Yamaha AN1x Synthesizer mailing list

Hi Jon,

I found your AN1x environment for Logic on the web, it works fine, 
but I have a question; 

I can send CC from Logic to the AN1x to edit patches, but when I 
tweak a knob on the AN1x it does not "move" the respective virtual 
fader in the Logic environment. Is this normal, or is there a way to 
make it work "back and forth" (a bit like if it was Sysex/Sound 
Diver) 

I am using Logic 6

Many thanks,

Gino

--- In AN1x-list@yahoogroups.com, "topfloormix" <topfloormix@a...> 
wrote:
> Hi Jon,

Hi G-

> 
> I found your AN1x environment for Logic on the web, it works fine, 
> but I have a question; 
> 
> I can send CC from Logic to the AN1x to edit patches, but when I 
> tweak a knob on the AN1x it does not "move" the respective virtual 
> fader in the Logic environment. Is this normal, or is there a way 
to 
> make it work "back and forth" (a bit like if it was Sysex/Sound 
> Diver) 
> 

Glad it's working for you. It's a 'tweaked' version of the original 
provided by Yamaha (I added the many parameters omitted by Yamaha.) 
To answer your question: yes, I believe it's possible but I never 
took the time to map the incoming CC numbers generated by the AN1x to 
the onscreen faders.  The thought of moving faders/knobs hadn't 
occured to me until I was late into the coding and I never went back 
to revisit it. 

There is a PLG150-AN Environment on the 'net (probably at 
Swiftkick.com if not in our Files section) that uses SYSEX to the 
same ends as my Mode 2 environment. Don't recall if it was coded for 
moving Faders/Knobs.  I'd rather use CC than SYSEX when possible.

If you haven't checked them out yet - you *need* to see the Effects 
and the Step Sequencer Environments - these are truely awesome and I 
wish I could take credit for them.  Again, check the Files section 
here at Yahoo! Groups:

http://groups.yahoo.com/group/AN1x-list/files/


> I am using Logic 6
> 

Still running LAG 5.5 and I'm slowly moving into OS X.


> Many thanks,
> 
> Gino


regards,

Jon

--- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@y...> wrote:
> --- In AN1x-list@yahoogroups.com, "topfloormix" <topfloormix@a...> 
> wrote:
> > Hi Jon,
> 
> Hi G-
> 
> > 
> > I found your AN1x environment for Logic on the web, it works 
fine, 
> > but I have a question; 
> > 
> > I can send CC from Logic to the AN1x to edit patches, but when I 
> > tweak a knob on the AN1x it does not "move" the respective 
virtual 
> > fader in the Logic environment. Is this normal, or is there a way 
> to 
> > make it work "back and forth" (a bit like if it was Sysex/Sound 
> > Diver) 
> > 
> 
> Glad it's working for you. It's a 'tweaked' version of the original 
> provided by Yamaha (I added the many parameters omitted by Yamaha.) 
> To answer your question: yes, I believe it's possible but I never 
> took the time to map the incoming CC numbers generated by the AN1x 
to 
> the onscreen faders.  The thought of moving faders/knobs hadn't 
> occured to me until I was late into the coding and I never went 
back 
> to revisit it. 
> 
> There is a PLG150-AN Environment on the 'net (probably at 
> Swiftkick.com if not in our Files section) that uses SYSEX to the 
> same ends as my Mode 2 environment. Don't recall if it was coded 
for 
> moving Faders/Knobs.  I'd rather use CC than SYSEX when possible.
> 
> If you haven't checked them out yet - you *need* to see the Effects 
> and the Step Sequencer Environments - these are truely awesome and 
I 
> wish I could take credit for them.  Again, check the Files section 
> here at Yahoo! Groups:
> 
> http://groups.yahoo.com/group/AN1x-list/files/
> 
> 
> > I am using Logic 6
> > 
> 
> Still running LAG 5.5 and I'm slowly moving into OS X.
> 
> 
> > Many thanks,
> > 
> > Gino
> 
> 
> regards,
> 
> Jon

Thanks for your time Jon 

Gino