The Yamaha AN1x Synthesizer mailing list

I used to morph quite a bit, and even ignored the recent posts on it.(it's been a little busy here)

And now suddenly....I am not sure what I need to set up in order to morph between scene 1 and two.
I know I have both lit, but now when I do it I do not morph...what else do I need to set up?

Thanks

Jim

====================================================
             Check out my original music at 
http://www.soundclick.com/bands/1/jackermusic.htm

"In theory there is no difference between theory and practice, 
but not in practice."
====================================================

--- In AN1x-list@yahoogroups.com, "James Acker" <jacker@o...> wrote:
> I used to morph quite a bit, and even ignored the recent posts on it.(it's been a 
little busy here)
> 
> And now suddenly....I am not sure what I need to set up in order to morph between 
scene 1 and two.
> I know I have both lit, but now when I do it I do not morph...what else do I need to 
set up?
> 
> Thanks
> 
> Jim
> 

Scene Control is documented on page 20 of the Owner's Manual. To summarize, 
press both SCENE switches - both LEDs should be illuminated; Roll the Mod Wheel to 
adjust the balance of Scence 1 relative to Scene 2, .ie., 'morph'.

You can change the physical controller assignment for Scene Control under UTILITY/
SETUP->Ctrl Device->SCENE The default setting is 1:Mod Dpt

Jon