The Yamaha AN1x Synthesizer mailing list

nevermind... I got it to work.


--- In AN1x-list@y..., "kollegekid12345" <kollegekid12345@y...> wrote:
> hello, 
> 
> I'm gettin a "SysExAdr" ERROR on the AN1x after using certain 
> features on the RM1X (like going from JOB mode into PATTERN mode). 
> The AN1x manual says this error message occurs when the recieved 
> system exclusive message address is incorrect and to confrim the 
> address of the trasmitted data. I tried setting the device number 
on 
> the AN1X to every poosible setting, and I'm still getting an error 
> message. When set at (1 through 16) I get an "DevNo. =NG" when set 
at 
> (off) I get "DevNo. =off" and when set at (all) I get "SysExAdr". 
> 
> My setup is basically:
> RM1X midi OUT >> EMU Xtreme Lead midi IN
> EMU Xtreme Lead Thru >> AN1X midi IN
> RM1X midi IN >> MIDI Keyboard midi OUT
> 
> I have the AN1X set to Tx Ch 1 and Rx Ch 1
> 
> Basically I'm trying to use the ANX1 strickly as a sound module 
that 

> I use MIDI channel 1 for...
> 
> thanks for any help
> dave