The Yamaha AN1x Synthesizer mailing list

Thanks to everyone for putting up with my obsessive questions over 
the last week. I finally figured out how to control the reverb, the 
echo, and the effects from the ribbon controller.

I set the wet/dry control in the matrix to direct and route it to the 
ribbon controller(X). I do this for both scenes. I then set Comm1 to 
delay return direct ribbon controller (X). Set Comm 2 to reverb 
return direct ribbon controller (X) You might want to use the ribbon 
controller to lower the volume as the effects make the patch louder.

Roll up an abrasive organ patch, then tap the ribbon controller. The 
sound goes from totally dry to instant Pink Floyd. Turn the feedback 
up to 90+ for the true Floyd experience. I haven't had a chance to 
really play with it (I had to go to work) but it looks like just the 
ticket for dub keyboards.

Rainbow Jimmy
http://www.spaceanimals.com
http://www.mp3.com/spaceanimals

--- In AN1x-list@y..., "spaceanimals" <alciere@m...> wrote:
> Roll up an abrasive organ patch, then tap the ribbon controller. 
The 
> sound goes from totally dry to instant Pink Floyd. Turn the 
feedback 
> up to 90+ for the true Floyd experience. I haven't had a chance 
to 
> really play with it (I had to go to work) but it looks like just the 
> ticket for dub keyboards.
> 

Hi Jimmy,

You might try the following pn ypur Pink Floyd Voice:

Select 7: RotarySP for the VariEF.

Set the Wet/Dry to D=W or above.

Assign Commn1 or Commn2 to Vari Param with Source set to 
A.MW and Depth set to taste (+32 is useful.)

regards,

Jon