The Yamaha AN1x Synthesizer mailing list

Hi all..



is it possible to store 2 scenes with 2 different midi channels within 1 voice?

What I want is to use 2 distinctive sounds in my track, but sometimes thay have to play at the same time. Now I experienced that the an1x only plays the voice which is selected, so I thought why not load the 2 sounds into 2 distinctive scnenes with eavh there own midi channel....

Is something like this possible, or do I have to record to audio for each an1x sound I'm using?

thx. Wilbert

-------------------------
Pas de Deux
Van Mierisstraat 25
2526 NM Den Haag
tel 070 4450855
fax 070 4450852
http://www.pdd.nl
info@...
-------------------------

[Non-text portions of this message have been removed]

Hi Wilbert,

>is it possible to store 2 scenes with 2 different midi channels within 1 voice?

You can use 2 different MIDI channels to play 2 scenes, but its a global function, and so can't be stored on a per-patch basis.  When you are in a split or dual patch, the "MIDI Rx" button (on the right) affects whichever scene is selected, and can be modified in real time.  This setting will remain so until you put it back, even if the patch changes.

I don't have me AN1x at home right now, but I believe that Local Off and a MIDI routing must also be used to make this work.

Regards,

-BW

--
Bruce Wahler
Ashby Solutions\ufffd   http://music.ashbysolutions.com
CloneWheel Support Group moderator
978.386.7389  voice/fax
bruce@...