The Yamaha AN1x Synthesizer mailing list

Hi Group,

How do I disable the Arp/Seq ON receive command in AN1x, which is being sent
from a external sequencer.
After rec a seq/Arp piece, I want to playback that piece, but the recorded
midi command embedded in that piece turns on the AN1x's Arp/Seq, so that I
have to disable it on AN1x manually. Is there anyway to disable this
"receive Arp/Seq ON command " permanently?

Thanks


Kamy

Hi Kamy,

There is no way to disable specific parameter changes on the AN1x.
However you can embed the sysex command to turn Apr/Seq off within your
sequenced song.

The sysex is:

F0 43 10 5C 10 00 50 00 F7

You should insert this after the initial setup data in the sequence that
configures patches etc.

Regards

Gary Gregson

Email:gary@...
http://www.yme.co.uk/yme


-----Original Message-----
From: Kamy [mailto:kgilani@...]
Sent: 24 November 2001 07:11
To: AN1x
Subject: [AN1x-list] Arp/Seq CC

Hi Group,

How do I disable the Arp/Seq ON receive command in AN1x, which is being
sent
from a external sequencer.
After rec a seq/Arp piece, I want to playback that piece, but the
recorded
midi command embedded in that piece turns on the AN1x's Arp/Seq, so that
I
have to disable it on AN1x manually. Is there anyway to disable this
"receive Arp/Seq ON command " permanently?

Thanks


Kamy




Community email addresses:
Post message: AN1x-list@yahoogroups.com
Subscribe: AN1x-list-subscribe@yahoogroups.com
Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
List owner: AN1x-list-owner@yahoogroups.com

Shortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list


Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Why not re-save the Voice with the Arp/Seq turned off? Or, rather than
record the Arp/Seq output into your sequencer to begin with - sync the
AN1x Arp/Seq to your sequencer.

regards,

Jon

--- In AN1x-list@y..., "Gary Gregson" <gary@y...> wrote:
> Hi Kamy,
>
> There is no way to disable specific parameter changes on the AN1x.
> However you can embed the sysex command to turn Apr/Seq off within your
> sequenced song.
>
> The sysex is:
>
> F0 43 10 5C 10 00 50 00 F7
>
> You should insert this after the initial setup data in the sequence that
> configures patches etc.
>
> Regards
>
> Gary Gregson
>
> Email:gary@y...
> http://www.yme.co.uk/yme
>
>
> -----Original Message-----
> From: Kamy [mailto:kgilani@e...]
> Sent: 24 November 2001 07:11
> To: AN1x
> Subject: [AN1x-list] Arp/Seq CC
>
> Hi Group,
>
> How do I disable the Arp/Seq ON receive command in AN1x, which is being
> sent
> from a external sequencer.
> After rec a seq/Arp piece, I want to playback that piece, but the
> recorded
> midi command embedded in that piece turns on the AN1x's Arp/Seq, so that
> I
> have to disable it on AN1x manually. Is there anyway to disable this
> "receive Arp/Seq ON command " permanently?
>
> Thanks
>
>
> Kamy
>
>
>
>
> Community email addresses:
> Post message: AN1x-list@y...
> Subscribe: AN1x-list-subscribe@y...
> Unsubscribe: AN1x-list-unsubscribe@y...
> List owner: AN1x-list-owner@y...
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/

Thanks All

I'll try them all to find out which one is more convenient to work with.

Kamy

> Why not re-save the Voice with the Arp/Seq turned off? Or, rather than
> record the Arp/Seq output into your sequencer to begin with - sync the
> AN1x Arp/Seq to your sequencer.
>
> regards,
>
> Jon
>
> --- In AN1x-list@y..., "Gary Gregson" <gary@y...> wrote:
>> Hi Kamy,
>>
>> There is no way to disable specific parameter changes on the AN1x.
>> However you can embed the sysex command to turn Apr/Seq off within your
>> sequenced song.
>>
>> The sysex is:
>>
>> F0 43 10 5C 10 00 50 00 F7
>>
>> You should insert this after the initial setup data in the sequence that
>> configures patches etc.
>>
>> Regards
>>
>> Gary Gregson
>>
>> Email:gary@y...
>> http://www.yme.co.uk/yme
>>
>>
>
>> Hi Group,
>>
>> How do I disable the Arp/Seq ON receive command in AN1x, which is being
>> sent
>> from a external sequencer.
>> After rec a seq/Arp piece, I want to playback that piece, but the
>> recorded
>> midi command embedded in that piece turns on the AN1x's Arp/Seq, so that
>> I
>> have to disable it on AN1x manually. Is there anyway to disable this
>> "receive Arp/Seq ON command " permanently?
>>
>> Thanks
>>
>>
>> Kamy