The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-03-31 23:06 UTC

Thread

Re: [AN1x-list] no sound!!???

Re: [AN1x-list] no sound!!???

2001-01-12 by Bastiaan van de Werk

for your a1x prop: Local off must be set to Local on....
I don't know if this is the best forum for those pc questions......good luck tho~! :)




[Non-text portions of this message have been removed]

no sound!!???

2001-11-12 by gehayman@hotmail.com

hello evryone. just wondering if anybody has experienced a similar
problem with an1x or can diagnose?? i am running an1x as controller
keyboard sequencing with a rm1x an have a few other units in the
chain (xbase09,basstation,sidstation,s2000,mpx100effects, also
trigger sh101,tb303 etc.) today all of a sudden my an1x fails to make
a sound when i remove either midi in or out leads from either the
sequencer or the back of the an1x and will only speak when these
leads are inserted. when they are plugged in evrything is fine.

a seperate problem is that my pc crashes and restarts itself
approx. every 10 minutes when it is included in this chain when i am
running an1x edit (awesome program!!) when midi in and out are both
plugged in to the pc. (i have no midi thru on the sound card-so i
have to enable midi thru on an1x edit to use the pc in the chain)if
only midi out is connected it will not crash. has any1 experienced
this?? mabe my pc or soundcard is not up to scratch? i am using
soundblaster live platinum soundcard, 533mhz celeron processor(i know
celeron is bog)
sorry bout the ramble but it sux!! thanks in advance. greal.

Re: [AN1x-list] no sound!!???

2001-11-12 by Paul Murphy

Sounds like your AN1X has LOCAL control turned OFF

----- Original Message -----
Show quoted textHide quoted text
From: <gehayman@...>
To: <AN1x-list@yahoogroups.com>
Sent: Monday, November 12, 2001 6:27 PM
Subject: [AN1x-list] no sound!!???


> hello evryone. just wondering if anybody has experienced a similar
> problem with an1x or can diagnose?? i am running an1x as controller
> keyboard sequencing with a rm1x an have a few other units in the
> chain (xbase09,basstation,sidstation,s2000,mpx100effects, also
> trigger sh101,tb303 etc.) today all of a sudden my an1x fails to make
> a sound when i remove either midi in or out leads from either the
> sequencer or the back of the an1x and will only speak when these
> leads are inserted. when they are plugged in evrything is fine.
>
> a seperate problem is that my pc crashes and restarts itself
> approx. every 10 minutes when it is included in this chain when i am
> running an1x edit (awesome program!!) when midi in and out are both
> plugged in to the pc. (i have no midi thru on the sound card-so i
> have to enable midi thru on an1x edit to use the pc in the chain)if
> only midi out is connected it will not crash. has any1 experienced
> this?? mabe my pc or soundcard is not up to scratch? i am using
> soundblaster live platinum soundcard, 533mhz celeron processor(i know
> celeron is bog)
> sorry bout the ramble but it sux!! thanks in advance. greal.
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Re: no sound!!???

2001-11-12 by gehayman@hotmail.com

thanks paul for the qik responce. problem1solved.
i feel silly now! greets from melbourne!

Re: no sound!!???

2001-11-12 by gehayman@hotmail.com

cheers bastiaan , oh well worth a shot. thanks anyway!!