The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-04-05 19:03 UTC

Thread

Midi Controller Number

Midi Controller Number

2001-07-13 by M Kalsbeek

Hi List,

I've got a question about the appregiator. Kan jou
switch it off trough a midi message? 

Grtz en thanks in advance,

M

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

RE: [AN1x-list] Midi Controller Number

2001-07-15 by Gary Gregson

>>
I've got a question about the appregiator. Kan jou
switch it off trough a midi message?
<<

You can turn it off by sending the appropriate system exclusive message.

However, if you set the machine to MODE2 controller response then the
manual indicates that the ARP/SEQ will respond to controller Number 90
(at least for foot pedal operations). I don't have my AN1x set up at the
moment so I cannot test....but it may be worth giving it a try.

[see page 96 of the manual for how to change controller modes]

Regards

Gary Gregson

Email:gary@...
http://www.yme.co.uk/yme

RE: RE: Midi Controller Number

2001-07-16 by M Kalsbeek

> >>
> I've got a question about the appregiator. Kan jou
> switch it off trough a midi message?
> <<
> 
> You can turn it off by sending the appropriate
> system exclusive message.
> 
> However, if you set the machine to MODE2 controller
> response then the
> manual indicates that the ARP/SEQ will respond to
> controller Number 90
> (at least for foot pedal operations). I don't have
> my AN1x set up at the
> moment so I cannot test....but it may be worth
> giving it a try.
> 
> [see page 96 of the manual for how to change
> controller modes]
> 
> Regards
> 
> Gary Gregson

Thanks a lot! I will look in to that!

once again thanks, greetz,

M

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.