The Yamaha AN1x Synthesizer mailing list

. . . I've got a question to.

Hi I'm new here and also bought an AN1X recently. It rules . . . but we all know that . . right.

Well, I want to know if the knobs are sendig midi if they are not turned. I've got an JX305 too and if it only sends parameters (cuttoff attack etc.) if you turn the knobs. How does this work with yahama, i got the idee that if you have knobs standing on other settings than 0 it automaticly sends the data to my sequencer. Maybe it's in the manual . . but i'll ask it anyway . . . you've been there and done that (i think).



thanks



M

(sorry for the poor english but I'm also from the Netherlands)




---------------------------------
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.

M.,

In my case the parameters are send through midi only when i turn the knobs. If the the settings are different from the ones as are stored in the patch it won't be recorded by midi. So if i modified the default patch sound before starting to record it via midi, i firstly store the patch and then start recording. I guess your JX305 works similar?

Anyway, hope this helps,
Ekosonic

----- Original Message -----
From: M Kalsbeek
To: AN1x-list@onelist.com
Sent: Saturday, February 26, 2000 12:32 PM
Subject: [AN1x-list] If we are talking about knobs . . . .


. . . I've got a question to.

Hi I'm new here and also bought an AN1X recently. It rules . . . but we all know that . . right.

Well, I want to know if the knobs are sendig midi if they are not turned. I've got an JX305 too and if it only sends parameters (cuttoff attack etc.) if you turn the knobs. How does this work with yahama, i got the idee that if you have knobs standing on other settings than 0 it automaticly sends the data to my sequencer. Maybe it's in the manual . . but i'll ask it anyway . . . you've been there and done that (i think).



thanks



M

(sorry for the poor english but I'm also from the Netherlands)

Yep. I noticed it too when I worked on a song this morning, my 'problem' was that I had recorded some parameters in my sequencer when I was fooling around with some strings. So when I chose another patch(voice in yahama terms) and played the song the parameter changes were also applied on the new patch, so I thought that the knobs were sending midi all the time. My JX305 works exactly the same, altough the sound engine is not as good as the an1x, it has a lot of sounds in it and you can do a lot with it. Personally I think that with my ASR10 sampler, it makes a pretty cool/practical setup. I work most of my hollydays to buy more stuff and so I can't afford to buy a lot of extra cool but not neccesary stuff. By da way where both dutch anyway ( I noticed the dot nl :))).
I think Yahama will come with a new AN ?X cause the AN1xes were pretty cheap half the price this christmas. My friend bought one when it was just out, I bought it a few months ago. So I'm pretty new with it all. The AN1X-editor on the pc is great. So is the support on the net. I like that.

Thanks

M



Ekosonic Amplifier <ekosonic@...> wrote:

From: "Ekosonic Amplifier" <ekosonic@...>

M., In my case the parameters are send through midi only when i turn the knobs. If the the settings are different from the ones as are stored in the patch it won't be recorded by midi. So if i modified the default patch sound before starting to record it via midi, i firstly store the patch and then start recording. I guess your JX305 works similar? Anyway, hope this helps,Ekosonic

---------------------------------
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.