Yahoo Groups archive
Thread
2001-04-02 by tam_ger@hotmail.com
Hi does anyone know how i can send two midi clock signals to two seperate ports? My Gear: ANx (of course) and a MC505, midiman 4x4 usb. The 505 will not pass on clock signal. Im controlling the gear through a master sequencer (cakewalk 9) In cakewalk there is only one port that you can send a clock signal to. Thanks for any input. Gerry B
2001-04-02 by RayMaxer
That's the stupid'est problem of Cakewalk .. You either have to use something like Hubi driver (shitty way) or use other sequencer - Logic or Cubase ... Also - AFAIK - AMT8 midi interface has a "global port" besides the 1....8 one's which you can use a target for cakewalk's clock then ... But I am not sure if it was AMT8 ? Ray. tam_ger@... wrote: > Hi does anyone know how i can send two midi clock signals to two > seperate ports? My Gear: ANx (of course) and a MC505, midiman 4x4 > usb. The 505 will not pass on clock signal. Im controlling the gear > through a master sequencer (cakewalk 9) > In cakewalk there is only one port that you can send a clock signal > to. > > Thanks for any input. > > Gerry B > > > Community email addresses: > Post message: AN1x-list@yahoogroups.com > Subscribe: AN1x-list-subscribe@yahoogroups.com > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > List owner: AN1x-list-owner@yahoogroups.com > > Shortcut URL to this page: > http://groups.yahoo.com/group/AN1x-list > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ -- http://www.mp3.com/raymaxer - full tracks and CD !
2001-04-02 by Blades
Just out of curiosity, what's wrong with using Hubi? I do agree that it would be a good feature, though I don't need it myself, so I never really noticed it was missing. I use Hubi for all sorts of stuff LIKE this though, without issue. Blades ----- Original Message ----- From: "RayMaxer" <digil@...> To: <AN1x-list@yahoogroups.com> Sent: Monday, April 02, 2001 4:53 PM Subject: Re: [AN1x-list] Midi clock signal > That's the stupid'est problem of Cakewalk .. > You either have to use something like Hubi driver (shitty way) or use other > sequencer - Logic or Cubase ... > Also - AFAIK - AMT8 midi interface has a "global port" besides the 1....8 > one's which you can use a target for cakewalk's clock then ... > But I am not sure if it was AMT8 ? > Ray. > > tam_ger@... wrote: > > > Hi does anyone know how i can send two midi clock signals to two > > seperate ports? My Gear: ANx (of course) and a MC505, midiman 4x4 > > usb. The 505 will not pass on clock signal. Im controlling the gear > > through a master sequencer (cakewalk 9) > > In cakewalk there is only one port that you can send a clock signal > > to. > > > > Thanks for any input. > > > > Gerry B > > > > > > Community email addresses: > > Post message: AN1x-list@yahoogroups.com > > Subscribe: AN1x-list-subscribe@yahoogroups.com > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > > List owner: AN1x-list-owner@yahoogroups.com > > > > Shortcut URL to this page: > > http://groups.yahoo.com/group/AN1x-list > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> > -- > http://www.mp3.com/raymaxer - full tracks and CD ! > > > > > Community email addresses: > Post message: AN1x-list@yahoogroups.com > Subscribe: AN1x-list-subscribe@yahoogroups.com > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > List owner: AN1x-list-owner@yahoogroups.com > > Shortcut URL to this page: > http://groups.yahoo.com/group/AN1x-list > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
2001-04-03 by Grant Davies
Most midi patch bays have a broadcast port, the Unitor and the Motu both use a broadcast port, e,g On the AMT8 port 9 should be the broadcast port where you send midi clock to. Cheers Grant
-----Original Message-----
From: RayMaxer [mailto:digil@...]
Sent: Monday, April 02, 2001 4:53 PM
To: AN1x-list@yahoogroups.com
Subject: Re: [AN1x-list] Midi clock signal
That's the stupid'est problem of Cakewalk ..
You either have to use something like Hubi driver (shitty way) or use
other
sequencer - Logic or Cubase ...
Also - AFAIK - AMT8 midi interface has a "global port" besides the 1....8
one's which you can use a target for cakewalk's clock then ...
But I am not sure if it was AMT8 ?
Ray.
tam_ger@... wrote:
> Hi does anyone know how i can send two midi clock signals to two
> seperate ports? My Gear: ANx (of course) and a MC505, midiman 4x4
> usb. The 505 will not pass on clock signal. Im controlling the gear
> through a master sequencer (cakewalk 9)
> In cakewalk there is only one port that you can send a clock signal
> to.
>
> Thanks for any input.
>
> Gerry B
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--
http://www.mp3.com/raymaxer - full tracks and CD !
Yahoo! Groups Sponsor
WeddingChannel.com, Click Here!
Community email addresses:
Post message: AN1x-list@yahoogroups.com
Subscribe: AN1x-list-subscribe@yahoogroups.com
Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
List owner: AN1x-list-owner@yahoogroups.com
Shortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]2001-04-03 by mark c. pipher
How would I do this with Logic? I've been trying to figure out how to send midi clock to multiple devices on Mac Logic Audio Gold for a few days now (including the PLG150-AN). I use an Opcode Studio 4 interface... does this have a global port or broadcast port? I don't have a manual for it - I "acquired" the Studio 4 recently for free so I don't know much about the details of it. Thanks! Mark on 4/2/01 3:53 PM, RayMaxer at digil@... wrote:
> That's the stupid'est problem of Cakewalk .. > You either have to use something like Hubi driver (shitty way) or use other > sequencer - Logic or Cubase ... > Also - AFAIK - AMT8 midi interface has a "global port" besides the 1....8 > one's which you can use a target for cakewalk's clock then ... > But I am not sure if it was AMT8 ? > Ray. > > tam_ger@... wrote: > >> Hi does anyone know how i can send two midi clock signals to two >> seperate ports? My Gear: ANx (of course) and a MC505, midiman 4x4 >> usb. The 505 will not pass on clock signal. Im controlling the gear >> through a master sequencer (cakewalk 9) >> In cakewalk there is only one port that you can send a clock signal >> to. >> >> Thanks for any input. >> >> Gerry B >> >> >> Community email addresses: >> Post message: AN1x-list@yahoogroups.com >> Subscribe: AN1x-list-subscribe@yahoogroups.com >> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com >> List owner: AN1x-list-owner@yahoogroups.com >> >> Shortcut URL to this page: >> http://groups.yahoo.com/group/AN1x-list >> >> >> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > -- > http://www.mp3.com/raymaxer - full tracks and CD ! > > > > > Community email addresses: > Post message: AN1x-list@yahoogroups.com > Subscribe: AN1x-list-subscribe@yahoogroups.com > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > List owner: AN1x-list-owner@yahoogroups.com > > Shortcut URL to this page: > http://groups.yahoo.com/group/AN1x-list > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
2001-04-03 by mark c. pipher
I don't know why I didn't think of this before. I found a PDF version of the Studio 4 manual online and it answered all of my questions. There's no need to educate me right now. Thanks for your time anyway. on 4/2/01 8:44 PM, mark c. pipher at mpipher@... wrote:
> How would I do this with Logic? I've been trying to figure out how to send > midi clock to multiple devices on Mac Logic Audio Gold for a few days now > (including the PLG150-AN). I use an Opcode Studio 4 interface... does this > have a global port or broadcast port? I don't have a manual for it - I > "acquired" the Studio 4 recently for free so I don't know much about the > details of it. Thanks! > > Mark > > >