Yahoo Groups archive
Thread
2001-01-15 by C Stone
I have had an AN1X for a while and now want to emulate and play around with a Roland SH-101 - type sound (I have an SH101 to guide me!) But I can't easily figure out how to get use of the AN1X suboscillator. I need it to fill out the bottom end that the 101 can do so well Any advice, listers? C
2001-01-15 by Peter Korsten
--- In AN1x-list@egroups.com, C Stone <chris.stone@s...> wrote: > I have had an AN1X for a while and now want to emulate and play around > with a Roland SH-101 - type sound (I have an SH101 to guide me!) > > But I can't easily figure out how to get use of the AN1X suboscillator. > I need it to fill out the bottom end that the 101 can do so well Does the AN1x actually *have* a sub-oscillator? What do those special waveforms, by the way? Anyone ever figured that one out? - Peter
2001-01-15 by Reggie
Ask Gery Gregson. In article <93v8tq+2shm@...>, Peter Korsten <peterk@...> writes >--- In AN1x-list@egroups.com, C Stone <chris.stone@s...> wrote: >> I have had an AN1X for a while and now want to emulate and play >around >> with a Roland SH-101 - type sound (I have an SH101 to guide me!) >> >> But I can't easily figure out how to get use of the AN1X >suboscillator. >> I need it to fill out the bottom end that the 101 can do so well > >Does the AN1x actually *have* a sub-oscillator? > >What do those special waveforms, by the way? Anyone ever figured that >one out? > >- Peter > > >Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > >Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list > -- Reggie
2001-01-15 by traun@mail.com
Phil wrote: > Hi C, > > There's no dedicated sub oscillator on the AN1x, but it does still > have 2 > oscillators to play with. The Sub Osc is usually a sine wave set to > one > octave below the main osc. You can set VCO2 in the AN1x to emulate > this. Sorry Phil. I have to correct you, on Roland Synthesizers the suboscillator is usually a square wave, the rest You wrote is ok. Joergen [Non-text portions of this message have been removed]
2001-01-16 by leo
Hey there Yamaha Always had a "sine wave" as a sub-osc all the analog CS series synth with subs are using a sine wave. i know my Cs-60 does. Leo traun@com wrote:
> > Phil wrote: > > > Hi C, > > > > There's no dedicated sub oscillator on the AN1x, but it does still > > have 2 > > oscillators to play with. The Sub Osc is usually a sine wave set to > > one > > octave below the main osc. You can set VCO2 in the AN1x to emulate > > this. > > Sorry Phil. I have to correct you, on Roland Synthesizers the > suboscillator is usually a square wave, the rest You wrote is ok. > > Joergen > > [Non-text portions of this message have been removed] > > Community email addresses: > Post message: AN1x-list@onelist.com > Subscribe: AN1x-list-subscribe@onelist.com > Unsubscribe: AN1x-list-unsubscribe@onelist.com > List owner: AN1x-list-owner@onelist.com > > Shortcut URL to this page: > http://www.onelist.com/community/AN1x-list
2001-01-16 by Phil
Hi C, There's no dedicated sub oscillator on the AN1x, but it does still have 2 oscillators to play with. The Sub Osc is usually a sine wave set to one octave below the main osc. You can set VCO2 in the AN1x to emulate this. Please post back if you need any help setting this up. Also, for a more realistic 101 emulation, try adding Feedback and make sure your Edge settings are on full (or is that minimum?) so it sounds bright and buzzy rather than soft and mellow. Phil
From: C Stone <chris.stone@...> Reply-To: AN1x-list@egroups.com Date: Mon, 15 Jan 2001 12:10:50 +0000 To: AN1x-list@egroups.com Subject: [AN1x-list] How to use the suboscillator I have had an AN1X for a while and now want to emulate and play around with a Roland SH-101 - type sound (I have an SH101 to guide me!) But I can't easily figure out how to get use of the AN1X suboscillator. I need it to fill out the bottom end that the 101 can do so well Any advice, listers? C Community email addresses: Post message: AN1x-list@onelist.com Subscribe: AN1x-list-subscribe@onelist.com Unsubscribe: AN1x-list-unsubscribe@onelist.com List owner: AN1x-list-owner@onelist.com Shortcut URL to this page: http://www.onelist.com/community/AN1x-list