Yahoo Groups archive
Thread
2007-04-01 by thilo_78
Hello, I would like to control some parameters of the effects-section via Midi. For example I would like to control Delay's "FB-Level" or "Delay Return", "Reverb Return" etc. In the Midi-Control Chart I did not find an entry. Is there a possibility to control these parameters (e.g. by routing it to ribbonX or another controller; or via sysex messages)?? Thank you very much and kind regards, Thilo
2007-04-01 by Jeff
Hello ! as far as i know the effects section parameters are not addressable by MIDI but can only be assigned to the own controls of the AN1x (pots, mod wheel and so on...) . It has to be done for each patch . I use to control the "leslie" speed with the mod wheel and the reverb and delay with 2 knobs, i never tried the ribbon controller (used mostly to control the cutoff and resonance of the filter together). The pedal controller (neither the footswitch nor the volume) should work too . OK, this cannot be done by a software sequencer .... @+ J.F. thilo_78 a \ufffdcrit : >Hello, > >I would like to control some parameters of the effects-section via >Midi. For example I would like to control Delay's "FB-Level" or "Delay >Return", "Reverb Return" etc. >In the Midi-Control Chart I did not find an entry. Is there a >possibility to control these parameters (e.g. by routing it to ribbonX >or another controller; or via sysex messages)?? > >Thank you very much and kind regards, > >Thilo > > > > > >--- >avast! Antivirus: message Entrant propre. >Base de donn\ufffdes des virus (VPS): 000729-2, 31/03/2007 >Test du: 02/04/2007 00:42:27 >avast! - copyright (c) 2000-2007 ALWIL Software. >http://www.avast.com > > > > > --- avast! Antivirus: message Sortant propre. Base de donn\ufffdes des virus (VPS): 000729-2, 31/03/2007 Test du: 02/04/2007 01:08:14 avast! - copyright (c) 2000-2007 ALWIL Software. http://www.avast.com
2007-04-02 by tidda_adda
Of course you can change all these parameters with MIDI. Look in MIDI Data Table <1-3> "MIDI Parameter Change Table (Current Voice Common Buffer" on page 14 of the Data List manual. Tidda --- In AN1x-list@yahoogroups.com, Jeff <jf.serviere@...> wrote: > > Hello ! > as far as i know the effects section parameters are not addressable by > MIDI but can only be assigned to the own controls of the AN1x (pots, mod
> wheel and so on...) . It has to be done for each patch . I use to > control the "leslie" speed with the mod wheel and the reverb and delay > with 2 knobs, i never tried the ribbon controller (used mostly to > control the cutoff and resonance of the filter together). The pedal > controller (neither the footswitch nor the volume) should work too . > OK, this cannot be done by a software sequencer .... > @+ > J.F. > > thilo_78 a écrit : > > >Hello, > > > >I would like to control some parameters of the effects-section via > >Midi. For example I would like to control Delay's "FB-Level" or "Delay > >Return", "Reverb Return" etc. > >In the Midi-Control Chart I did not find an entry. Is there a > >possibility to control these parameters (e.g. by routing it to ribbonX > >or another controller; or via sysex messages)?? > > > >Thank you very much and kind regards, > > > >Thilo > > > > > > > > > > > >--- > >avast! Antivirus: message Entrant propre. > >Base de donnÚes des virus (VPS): 000729-2, 31/03/2007 > >Test du: 02/04/2007 00:42:27 > >avast! - copyright (c) 2000-2007 ALWIL Software. > >http://www.avast.com > > > > > > > > > > > > > > --- > avast! Antivirus: message Sortant propre. > Base de donnÚes des virus (VPS): 000729-2, 31/03/2007 > Test du: 02/04/2007 01:08:14 > avast! - copyright (c) 2000-2007 ALWIL Software. > http://www.avast.com >
2007-04-03 by thilo_78
Thank you for your replies and your hint to the table with the parameters! I have captured the sysex-commands from the An1x-Editor with (the great tool) Bome's Midi Translator (and MidiYoke); With the Translator I can control the synth now via normal Midi-CC from my sequencer. It is really great. I have written a howto for the sequencer I am using (Renoise), it should be applicable for others as well: http://www.renoise.com/board/index.php?showtopic=11777 Kind regards, Thilo --- In AN1x-list@yahoogroups.com, "tidda_adda" <acjiskoot@...> wrote: > > Of course you can change all these parameters with MIDI. > Look in MIDI Data Table <1-3> "MIDI Parameter Change Table (Current > Voice Common Buffer" on page 14 of the Data List manual. > > Tidda > > > --- In AN1x-list@yahoogroups.com, Jeff <jf.serviere@> wrote: > > > > Hello ! > > as far as i know the effects section parameters are not addressable by > > MIDI but can only be assigned to the own controls of the AN1x (pots, > mod > > wheel and so on...) . It has to be done for each patch . I use to > > control the "leslie" speed with the mod wheel and the reverb and delay > > with 2 knobs, i never tried the ribbon controller (used mostly to > > control the cutoff and resonance of the filter together). The pedal > > controller (neither the footswitch nor the volume) should work too . > > OK, this cannot be done by a software sequencer .... > > @+ > > J.F. > > > > thilo_78 a écrit : > > > > >Hello, > > > > > >I would like to control some parameters of the effects-section via > > >Midi. For example I would like to control Delay's "FB-Level" or "Delay > > >Return", "Reverb Return" etc. > > >In the Midi-Control Chart I did not find an entry. Is there a > > >possibility to control these parameters (e.g. by routing it to ribbonX
> > >or another controller; or via sysex messages)?? > > > > > >Thank you very much and kind regards, > > > > > >Thilo > > > > > > > > > > > > > > > > > >--- > > >avast! Antivirus: message Entrant propre. > > >Base de donnÚes des virus (VPS): 000729-2, 31/03/2007 > > >Test du: 02/04/2007 00:42:27 > > >avast! - copyright (c) 2000-2007 ALWIL Software. > > >http://www.avast.com > > > > > > > > > > > > > > > > > > > > > > > --- > > avast! Antivirus: message Sortant propre. > > Base de donnÚes des virus (VPS): 000729-2, 31/03/2007 > > Test du: 02/04/2007 01:08:14 > > avast! - copyright (c) 2000-2007 ALWIL Software. > > http://www.avast.com > > >