Yahoo Groups archive
Thread
2007-01-21 by evilbarlow
I don't know where to get some- all of my efforts seem to lead to some website trying to sell me more equipment- I just need 5 AN1x knobs dammit!!! PLEASE!! I play live using it and it looks wank with knobs missing!
2007-01-21 by Jeff
evilbarlow a \ufffdcrit : >I don't know where to get some- all of my efforts seem to lead to some >website trying to sell me more equipment- I just need 5 AN1x knobs >dammit!!! > >PLEASE!! > >I play live using it and it looks wank with knobs missing! > > > > >--- >avast! Antivirus: message Entrant propre. >Base de donn\ufffdes des virus (VPS): 000704-0, 18/01/2007 >Test du: 21/01/2007 21:11:50 >avast! - copyright (c) 2000-2007 ALWIL Software. >http://www.avast.com > > > > > If you want the stock model knobs, you must go to some Yamaha repair center . But, why not change ? You can find knobs with the same type of hole for cheap by Farnell . The size is approximately the same and they are not ugly, you can even choose the color of the knob and of the stripe . You can find the famous "chicken head" knobs found on vintage amps too : once i've used them at work just for fun, my frontplate looked like an old AC30 ! I believe that a genuine Yamaha knob is as expensive as box of 10 Farnell knobs... Important remark : i don't have any interest in this company, but i use to buy all kinds of electronic devices for prototyping or maintenance at work . You order on line and receive the gear 2 or 3 days later . @+ J.F. --- avast! Antivirus: message Sortant propre. Base de donn\ufffdes des virus (VPS): 000704-0, 18/01/2007 Test du: 21/01/2007 21:41:44 avast! - copyright (c) 2000-2007 ALWIL Software. http://www.avast.com
2007-01-22 by Bob S.
I bought keys for my AN1x just a couple of months ago directly from Yamaha. The probably have knobs too. All Electronics also has small knobs: http://www.allelectronics.com/cgi-bin/category/310/Knobs.html Don't forget to measure & use those designed for a D shaft. Bob El Segundo, CA
----- Original Message ----- From: Jeff To: AN1x-list@yahoogroups.com Sent: Sunday, January 21, 2007 12:41 PM Subject: Re: [AN1x] PLEASE HELP! I NEED AN1x KNOBS!! evilbarlow a écrit : >I don't know where to get some- all of my efforts seem to lead to some >website trying to sell me more equipment- I just need 5 AN1x knobs >dammit!!! > >PLEASE!! > >I play live using it and it looks wank with knobs missing! > > > > >--- >avast! Antivirus: message Entrant propre. >Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 >Test du: 21/01/2007 21:11:50 >avast! - copyright (c) 2000-2007 ALWIL Software. >http://www.avast.com > > > > > If you want the stock model knobs, you must go to some Yamaha repair center . But, why not change ? You can find knobs with the same type of hole for cheap by Farnell . The size is approximately the same and they are not ugly, you can even choose the color of the knob and of the stripe . You can find the famous "chicken head" knobs found on vintage amps too : once i've used them at work just for fun, my frontplate looked like an old AC30 ! I believe that a genuine Yamaha knob is as expensive as box of 10 Farnell knobs... Important remark : i don't have any interest in this company, but i use to buy all kinds of electronic devices for prototyping or maintenance at work . You order on line and receive the gear 2 or 3 days later . @+ J.F. --- avast! Antivirus: message Sortant propre. Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 Test du: 21/01/2007 21:41:44 avast! - copyright (c) 2000-2007 ALWIL Software. http://www.avast.com [Non-text portions of this message have been removed]
2007-01-22 by Bob S.
Also www.jameco.com Go to Electromechanical->Knobs->Plastic
----- Original Message ----- From: Bob S. To: AN1x-list@yahoogroups.com Sent: Sunday, January 21, 2007 5:16 PM Subject: Re: [AN1x] PLEASE HELP! I NEED AN1x KNOBS!! I bought keys for my AN1x just a couple of months ago directly from Yamaha. The probably have knobs too. All Electronics also has small knobs: http://www.allelectronics.com/cgi-bin/category/310/Knobs.html Don't forget to measure & use those designed for a D shaft. Bob El Segundo, CA ----- Original Message ----- From: Jeff To: AN1x-list@yahoogroups.com Sent: Sunday, January 21, 2007 12:41 PM Subject: Re: [AN1x] PLEASE HELP! I NEED AN1x KNOBS!! evilbarlow a écrit : >I don't know where to get some- all of my efforts seem to lead to some >website trying to sell me more equipment- I just need 5 AN1x knobs >dammit!!! > >PLEASE!! > >I play live using it and it looks wank with knobs missing! > > > > >--- >avast! Antivirus: message Entrant propre. >Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 >Test du: 21/01/2007 21:11:50 >avast! - copyright (c) 2000-2007 ALWIL Software. >http://www.avast.com > > > > > If you want the stock model knobs, you must go to some Yamaha repair center . But, why not change ? You can find knobs with the same type of hole for cheap by Farnell . The size is approximately the same and they are not ugly, you can even choose the color of the knob and of the stripe . You can find the famous "chicken head" knobs found on vintage amps too : once i've used them at work just for fun, my frontplate looked like an old AC30 ! I believe that a genuine Yamaha knob is as expensive as box of 10 Farnell knobs... Important remark : i don't have any interest in this company, but i use to buy all kinds of electronic devices for prototyping or maintenance at work . You order on line and receive the gear 2 or 3 days later . @+ J.F. --- avast! Antivirus: message Sortant propre. Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 Test du: 21/01/2007 21:41:44 avast! - copyright (c) 2000-2007 ALWIL Software. http://www.avast.com [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
2007-03-10 by captain.moloney
I too need AN1x knobs. Actually, I only need one but I went to the website mentioned in this message and I would have to know the shaft size for the knob I'm buying. How in the hell I'm I gonna figure that one out? I need the knob that is located furthest to the right of the board. It seems that all 9 of the knobs to the left are the same size and will fit on the shaft on the right, that's missing the knob, but they fit alittle loose and seems slightly sloppy(easy to pull off). Can anyone state the shaft size for the knob I'm looking for? thanks, Kevin --- In AN1x-list@yahoogroups.com, "Bob S." <tttsystems@...> wrote: > > Also www.jameco.com > > Go to Electromechanical->Knobs->Plastic > > > > ----- Original Message ----- > From: Bob S. > To: AN1x-list@yahoogroups.com > Sent: Sunday, January 21, 2007 5:16 PM > Subject: Re: [AN1x] PLEASE HELP! I NEED AN1x KNOBS!! > > > I bought keys for my AN1x just a couple of months ago directly from Yamaha. The probably have knobs too. > > All Electronics also has small knobs: > http://www.allelectronics.com/cgi-bin/category/310/Knobs.html > > Don't forget to measure & use those designed for a D shaft. > > Bob > El Segundo, CA > > ----- Original Message ----- > From: Jeff > To: AN1x-list@yahoogroups.com > Sent: Sunday, January 21, 2007 12:41 PM > Subject: Re: [AN1x] PLEASE HELP! I NEED AN1x KNOBS!! > > evilbarlow a écrit : > > >I don't know where to get some- all of my efforts seem to lead to some > >website trying to sell me more equipment- I just need 5 AN1x knobs > >dammit!!! > > > >PLEASE!! > > > >I play live using it and it looks wank with knobs missing! > > > > > > > > > >--- > >avast! Antivirus: message Entrant propre. > >Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 > >Test du: 21/01/2007 21:11:50 > >avast! - copyright (c) 2000-2007 ALWIL Software. > >http://www.avast.com > > > > > > > > > > > If you want the stock model knobs, you must go to some Yamaha repair > center . But, why not change ? > You can find knobs with the same type of hole for cheap by Farnell . The > size is approximately the same and they are not ugly, you can even > choose the color of the knob and of the stripe . You can find the famous > "chicken head" knobs found on vintage amps too : once i've used them at > work just for fun, my frontplate looked like an old AC30 ! I believe > that a genuine Yamaha knob is as expensive as box of 10 Farnell knobs... > Important remark : i don't have any interest in this company, but i use > to buy all kinds of electronic devices for prototyping or maintenance > at work . You order on line and receive the gear 2 or 3 days later .
> @+ > J.F. > > --- > avast! Antivirus: message Sortant propre. > Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 > Test du: 21/01/2007 21:41:44 > avast! - copyright (c) 2000-2007 ALWIL Software. > http://www.avast.com > > [Non-text portions of this message have been removed] > > > > > > [Non-text portions of this message have been removed] >
2007-03-10 by Thomas Wolfe
I bought an AN1x on eBay not too long ago (Sept 2006) that was missing the same knob. I called Yamaha Parts and got it for US$10.91 shipped. They got it to me in about 3 or so days (I live in Colorado, USA). Here's the website (for the US): http://www.yamaha.com/yamahavgn/CDA/ContentDetail/Text_WithCatMenu_SC/0,,CTID%25253D410040%252526CNTYP%25253DGENERAL,00.html Tom --- In AN1x-list@yahoogroups.com, "captain.moloney" <captain.moloney@...> wrote:
> > I too need AN1x knobs. Actually, I only need one but I went to the > website mentioned in this message and I would have to know the shaft > size for the knob I'm buying. How in the hell I'm I gonna figure that > one out? > > I need the knob that is located furthest to the right of the board. > It seems that all 9 of the knobs to the left are the same size and > will fit on the shaft on the right, that's missing the knob, but they > fit alittle loose and seems slightly sloppy(easy to pull off). Can > anyone state the shaft size for the knob I'm looking for? > > thanks, > > Kevin > > --- In AN1x-list@yahoogroups.com, "Bob S." <tttsystems@> wrote: > > > > Also www.jameco.com > > > > Go to Electromechanical->Knobs->Plastic > > > > > > > > ----- Original Message ----- > > From: Bob S. > > To: AN1x-list@yahoogroups.com > > Sent: Sunday, January 21, 2007 5:16 PM > > Subject: Re: [AN1x] PLEASE HELP! I NEED AN1x KNOBS!! > > > > > > I bought keys for my AN1x just a couple of months ago directly > from Yamaha. The probably have knobs too. > > > > All Electronics also has small knobs: > > http://www.allelectronics.com/cgi-bin/category/310/Knobs.html > > > > Don't forget to measure & use those designed for a D shaft. > > > > Bob > > El Segundo, CA > > > > ----- Original Message ----- > > From: Jeff > > To: AN1x-list@yahoogroups.com > > Sent: Sunday, January 21, 2007 12:41 PM > > Subject: Re: [AN1x] PLEASE HELP! I NEED AN1x KNOBS!! > > > > evilbarlow a écrit : > > > > >I don't know where to get some- all of my efforts seem to lead > to some > > >website trying to sell me more equipment- I just need 5 AN1x > knobs > > >dammit!!! > > > > > >PLEASE!! > > > > > >I play live using it and it looks wank with knobs missing! > > > > > > > > > > > > > > >--- > > >avast! Antivirus: message Entrant propre. > > >Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 > > >Test du: 21/01/2007 21:11:50 > > >avast! - copyright (c) 2000-2007 ALWIL Software. > > >http://www.avast.com > > > > > > > > > > > > > > > > > If you want the stock model knobs, you must go to some Yamaha > repair > > center . But, why not change ? > > You can find knobs with the same type of hole for cheap by > Farnell . The > > size is approximately the same and they are not ugly, you can > even > > choose the color of the knob and of the stripe . You can find the > famous > > "chicken head" knobs found on vintage amps too : once i've used > them at > > work just for fun, my frontplate looked like an old AC30 ! I > believe > > that a genuine Yamaha knob is as expensive as box of 10 Farnell > knobs... > > Important remark : i don't have any interest in this company, but > i use > > to buy all kinds of electronic devices for prototyping or > maintenance > > at work . You order on line and receive the gear 2 or 3 days > later . > > @+ > > J.F. > > > > --- > > avast! Antivirus: message Sortant propre. > > Base de donnÚes des virus (VPS): 000704-0, 18/01/2007 > > Test du: 21/01/2007 21:41:44 > > avast! - copyright (c) 2000-2007 ALWIL Software. > > http://www.avast.com > > > > [Non-text portions of this message have been removed] > > > > > > > > > > > > [Non-text portions of this message have been removed] > > >