The Yamaha AN1x Synthesizer mailing list

Hello,

yes it is possbile/available !

but u need to select CC mode 2 on the AN1x
(page 96 of the plain manual 'control change modes') 
and then check page 9 of the data list manual

vco1 midi CC 78 Pulse width 
vco1 midi CC 79 PWM depth 
vco2 midi CC 55 Pulse width 
vco2 midi CC 56 PWM depth 

Regards
--------------------------------------------------Env1-----Env2--Env3-----------
Andrea.TONI@...                               Vco1 \    |     |  \
Solar-Terrestrial Missions (Sci-Sh)               Vco2-->--Vcf-->Vca-->Ducati996 
www.rssd.esa.int                                  Vco3 /    |     |  /
--------------------------------------------------Lfo1-----Lfo2--Lfo3-----------


Sorry, I just recognised that I picked the wrong table, it wasn't the CC table, 
so Pulswidth isn't avaiable via a predefined controller... :( But it's still 
possible to route the Pulswidth to Mod-Wheel, Aftertouch or one of the other 
avaiable CC# by using the control-matrix...

On 7 Feb 2006 at 23:55, digitaldisko wrote:

> can I do this with a simple midi keyboard with a few buttons to 
> store programs?  

If it supports channel pressure or having a mod-wheel, even pitch pend can be 
used, if you don't need the controller otherwise...

> Will I be able to tell how much I have changed the 
> pulse-width once I start to adjust the parameters?

Depends on your entry in the control-matrix, direct control or just a certain 
amount. Since you have to set it for every preset you use, you can decide what 
works best for the sound...

...Summa