--- In AN1x-list@yahoogroups.com, cavey@r... wrote: > > > Ah, well, yes, I have been over generalising a bit here. With 'most > people' I meant the people that seemed to have trouble getting AN1xedit > to work and have mailed this list. But it was just meant as a figure of > speech, as introduction to the questions I posted below. > I see where you're coming from and perhaps I was too abrupt in my response. Apologies. > > > I have been running around with > > > programming an editor myself. There are just a couple of problems. > > > > And are you prepared to offer troubleshooting and assitance to your user base when > > somebody asserts they can't get it to work under Windows or OS X? > > > Yes and no, my main development environment would be Linux, thus already > tailoring towards the more tech-savvy people. Furthermore the idea is to > open-source the project, building a community (perhaps) around it. No > commercial idea behind it. Just like with the AN1xedit. And the support? > Hmm, it "should work straight out of the box after compiling hell" ;) > > Of course, the more user friendly it would turn out to be, the better, > but currently there is no way that I have found, of editing the AN1x > from a Linux based environment. An itch I might be able to scratch, if I > can get my head to it. You might want to seek out the fellow who ported ZynAddSubFX from Win to OS X. I know he is an active proponent of open source and might help direct you to some resources: http://70.24.158.31:8080/zyn_mac/index.html > > There is extensive SysEx documentation in the AN1x Data List and the AN200 Owner's > > Manual. You might also take the time to review the Help file which is provided with > > AN1xEdit as it contains a great deal of useful information regarding the differences > > between AN1x & PLG150-AN parameters and Sys ID headers. > > > Ah! The AN1x Data list, ok. Because the AN1x manual doesn't really hold > that much info. I'll check up on the Data list in the files section. The Data List is VERY thorough as is the SysEx implementation in the AN200 Owner's Manual. > [snip the other 3 questions] > > You'll need to take these questions to a developer specific list. > > > Most likely yes :) But was just thinking I could make some inquiries > here first. Who knows whether there are more programmers on the list. I don't know of any specific resources, but I'm certain there must be something here at Yahoo! GRoups. Jon
Message
Re: [AN1x] Editing the AN200 without using the software editor
2005-11-04 by Jon
Attachments
- No local attachments were found for this message.
