This was asked not so long ago. So answer should be there in the list
archives..
These were the specs of U.S adapter,
Input: AC 120v 60Hz 15VA
Output: DC 12v 700 mA
Polarity: inner + outer -
And I have non-Yamaha adapter:
Input: AC 230V ~50Hz
Output: 12V, 600mA
So I'd say any 12V/600-700mA adapter should be fine. The plug to the AN1x
should be standard 12V plug (size of the plug).
archives..
These were the specs of U.S adapter,
Input: AC 120v 60Hz 15VA
Output: DC 12v 700 mA
Polarity: inner + outer -
And I have non-Yamaha adapter:
Input: AC 230V ~50Hz
Output: 12V, 600mA
So I'd say any 12V/600-700mA adapter should be fine. The plug to the AN1x
should be standard 12V plug (size of the plug).
On Sun, 20 Mar 2005 12:40:06 -0000, accession2001 wrote:
>While putting my studio back together this evening, I've since
>discovered my
>mate didn't pack the ACadaptor/transformer/powersu
>pply/plugpack/wallwart/
>watchamacallit.
>
>The manual only refers to the part: PA-3B.
>
>Would someone be kind enough to get down amongst the dust and read
>out
>the specs of their unit?
>
>It's just the specified output I need.
>
>AC? DC? Volts? Amps?
>
>Cheers guys,
>
>Phil
>(aka Accession)
// Jouni
--
Jouni Airaksinen // www.markvera.net
www.spacesynth.net the place where spacesynth scene meets!