The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "Timo Sandholm" 
<timo.sandholm@u...> wrote:
> Hi Jon,
> 
> Thank you for the answer, hope I understood it correctly :) ... So 
this is
> what I understood: I need to program my AN1x so that the patch (or 
was it
> called program?) I'd like to use must have PitchBend setting in 
range -12 to
> +12. Then I need to program my midi pedal so that there is one 
pedal which
> sends PitchPend with value 0 (one octave down) and then one pedal 
with PB
> value 64 (reset) and so on... Cool, it sounds like it could be 
working :) I
> need to try this back home today.
> 
> 
> 
> Cheers,
> TimoS

The dual pedal idea is what i was going to suggest.  Do you stab the 
pedal or hold as you could program one to pitch up on press & reset 
on release and on the other pitch down on press & reset on release.

This would require you hold the pedal to transpose and release to 
reset (toggle mode i think).

Is there a rocker type pedal on your controller or just on/off?

A rocker pedal would be easier to program with up/reset/down.

Regards

Richard