The Yamaha AN1x Synthesizer mailing list

I've just gotten around to putting AN1xEdit back on this PC and since 
the last time I used it I have started using the SoundBlaster Extigy 
USB audio interface, with Win2K Pro and the most recent service packs.
1.5 gigs RAM and an Athlon 2200+ CPU.  

No matter what config I use, when sending or receiving, AN1xEdit 
generates an error and shuts down.  

I've disabled the MIDI Thru since I remember having much issues with 
that config a few years back.  The MIDI Thru cable has been 
disconnected from the back of the AN1x and the synth has been power 
cycled after removing that cable.  The PC was rebooted after 
disconnecting that cable, just in case.  I've got the Extigy ports 
listed correctly in the config.  I can play the synth using the 
keyboard in the program with no problems, so it's transmitting the 
MIDI signal directly to the synth.

I've also reinstalled AN1xEdit into the default folder it calls for, 
but still no joy.

All of the following params are matched in the program and on the 
synth:

Key Tx = 1
MIDI Rx1 = 1
MIDI Rx2 = 2
Arp Tx = OFF
Device = 1 

Anyone else using the Extigy see a similar issue?  I searched the 
group for any past messages with 'Extigy' in the body, but nothing 
found.  I'm wondering if this is pertaining to the USB connection on 
the Extigy.  At this point, I'm pretty much stuck.  

Suggestions?  Other than buying a Mac or getting a different OS 
hehe...



Aaron
www.deeplycreepy.com