The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-04-28 22:40 UTC

Message

Re: [AN1x-list] Request some sound programming knowledge

2000-06-11 by jondl

Do you ever use the "Init?" function to select from the program
'templates'?  Select a Voice you want to overwrite; type 1-3-0 and hit
the YES/ENTER button; reply Y to the subsequent prompt; use the keypad
to select from the 8 choices - Strings is equated to number 4; hit ENTER
and you have a template for starting a String Patch.  Remember that
changes are not permanent until you Save the edited Voice.  The template
is really 'vanilla' but a good kick off point.

Phil's email is right on the money! A very good tutorial on programming
a String Sound from scratch.  You won't go wrong using his note in
combination with the Init functions.  Personally, I find the templates a
real time saver.  Try using the Brass template as a kick off point and
adjust the ADSRs and VCOs for a different kind of String Feel - or the
PWM template.  These are my favorites shot cuts.

Once you've got your sounds together don't forget to exploit the Control
Matrix features.  Try any or all of the following:

Route AT to VCO2 Level - this will allow you to use key pressure to
introduce a different set of harmonics
Route Vel to AEG Attack - this will allow you to control the VCA attack
time with key velocity
Route MW to LFO1 Speed - this will allow you to control the LFO1 rate
with the MOD Wheel.  Remember the Depth amount is programmable - it does
not have to be a 1:1 ratio (I love that!)

These are just some suggestions - the possibilities are endless. The
Control Matrix is a tremendous feature of the AN1x.  Very easy to use. 
Yamaha really did design a good, sensible subtractive synth engine.  All
the basics are covered.

Hope this helps - definitely try and use Phil's note a kick-off point!

Regards,
Jon

mango wrote:
> 
> Can anyone tell me what string sounds are made of?
> Waveform? ADSR filter & amp setting? kind of modulations needed?
> 
> ------------------------------------------------------------------------
> How about a flat, no-fee long distance rate of 6.7\ufffd per min. -
> or less? Join beMANY! Our huge buying group gives you rates which
> fall monthly, plus an extra $60 in FREE calls!
> http://click.egroups.com/1/3820/7/_/663009/_/960688918/
> ------------------------------------------------------------------------
> 
> Community email addresses:
>   Post message: AN1x-list@onelist.com
>   Subscribe:    AN1x-list-subscribe@onelist.com
>   Unsubscribe:  AN1x-list-unsubscribe@onelist.com
>   List owner:   AN1x-list-owner@onelist.com
> 
> Shortcut URL to this page:
>   http://www.onelist.com/community/AN1x-list

-- 
http://www.jdlx-musique.com/

Featuring support for the Ensoniq ASR-X Pro Sampler and Yamaha AN1x Synthesizer

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.