The Yamaha AN1x Synthesizer mailing list

Correct. In the Ctrl Matrix you can set the VarEF D:W parameter to 
the physical controller or CC message number of your choice. 
This allows you to dynamically adjust the dry/wet setting of the 
Variation Effect.

In addition to the sixteen Ctrl Matrix sets you also have Common 
Set 1 and 2 parameters shared by each Scene in a Voice. This 
allows you to set Volume, Pan, Delay Return, Reverb Return or 
the Variation Parameter to the physical controller or CC 
message number of your choice. Unfortunately you are limited to 
two of the three FX related parameters using the Commn Sets, 
i.e., you can't control the Dly Rtn, Rev Rtn AND Vari parms 
simultaneosuly.

As much as enjoy and appreciate the flexibility fo the Control 
Matrix I find myself frustrated more often with this type of design 
limitation. Another example: as I was working on my Electronic 
Organ Voices I had assigned PEG Decay and PEG Depth to 
values of 5 and 20 respectively to produce a key click at note on. I 
thought it would be interesting to assign the PEG Depth 
parameter to Knob 3 via the Ctrl Matrix so the amount of ey click 
could be variable. I wanted to limit the Depth range to a value of 
32 to restrict the amount of change to a series of values that 
would be realistically found on an organ as opposed to a synth. 
Unfortunately the Ctrl Matrix permits the PEG Depth value to be 
set only to Direct. While this clearly is not a show stopper, IMO it 
defeats the point of having a scalable value to begin with! 

regards,

Jon



--- In AN1x-list@y..., "RayMaxer" <digil@d...> wrote:
> Jimmy
> 
> AFAIR there are 2 special slots in the MAtrix for contrllling FX 
params ,
> including FX wet dry mix.
> Try using them..
>  (easier with AN1xEdit - they are the rightest ones there on 
Matrix page)
> 
> Ray.
> 
> ----- Original Message -----
> From: "spaceanimals" <alciere@m...>
> To: <AN1x-list@y...>
> Sent: Thursday, 19 September 2002 ã. 22:50
> Subject: [AN1x] knobs of effects
> 
> 
> > I set the control matrix so that knob 4 controls the wet dry 
control
> > for the effects. I set the wet dry mix to 64 dry. The sound was 
still
> > very wet. I turned the knob-no change. I set the mod matrix to
> > +64,    -64, and direct. No change.
> >
> > I also tried setting knob 4 to control comm 1 delay, and 
comm 2
> > reverb. I have no idea what those are but I was hoping to get 
more
> > delay and more reverb when I turned the knob up. No luck.
> >
> > I've been playing with the phase shift and delay effects. They 
sound
> > nice but the take away a little of the crispness and the 
definition
> > of the sound.So using a knob to turn it up and turn it down 
would be
> > real nice.
> >
> > Thanks in advance.
> >
> > Rainbow Jimmy
> > http://www.spaceanimals.com
> > http://www.mp3.com/spaceanimals
> >
> >
> >
> > Community email addresses:
> >   Post message: AN1x-list@y...
> >   Subscribe:    AN1x-list-subscribe@y...
> >   Unsubscribe:  AN1x-list-unsubscribe@y...
> >   List owner:   AN1x-list-owner@y...
> >
> > Shortcut URL to this page:
> >    http://groups.yahoo.com/group/AN1x-list
> >
> >
> > Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/
> >
> >