The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@y..., terryfunken@a... wrote:
> 
> In a message dated 29/5/02 12:34:41 pm, alan@s... writes:
> 
> >Todays bizarre question. I have my AN1x as the master 
keyboard which 
> >controls my Korg N364. When I first boot everything up, my 
Korg is 
> >out of tune. 
> 
> Hmm very bizarre!- Could it have something to do with 
Yamaha's Middle C being 
> different to other manufacturer's middle C's?- How out of tune 
is the korg? 
> is it semitones of microtonal?- I know the AN can sometimes 
be a pig to tune 
> to other things. It may be that one of your controllers is set to 
output a 
> control while a receiving parameter on the Korg is assigned to 
that midi 
> input which is corresponding to pitch- try turning off all 
controller outs on 
> the AN and seeing what that does.

This is a very good point. Double check you haven't inadvertantly 
assigned PB or a VCO1 or VCO2 Pitch adjustment to an Assign 
Knob, Pedal or Wheel that you hadn't intended too (see p. 9 of 
the Data List for Control Change numbers.)

 I would first check the Ctrl Device and Ctrl No. settings under 
UTILITY/SETUP - assuming the problem is global, i.e., it doesn't 
matter which Voice is active on the AN1x for the Korg to 
misbehave. If the problem occurs with only specific Voices then 
troubleshoot from the Ctrl Matrix settings.

regards,

Jon