--- In AN1x-list@y..., Jaun Manuek <jaunmanuek@y...> wrote:
p. 66 of the manual. 'The Ring Modulator combines the VCO1
and VCO2 signlas and outputs the sums and differences of the
frequency components of both inputs.' 1st of all - using the init
Normal preset provides you w/ two osc set to Saw with only a
minor differences in the Edge param. 2nd, if you check under
Mix/VCF you'll see that VCO2 Level is set to '0' - so, your ears are
not miseleading you. There is nothing to sum and output from
the preset you are using...
I suggest you alter the Pitch settings for each OSC, alter the
Edge settings and alter the Waveform selections - you'll hear a
more substantial change in timbre.
to display the OS version.
Jon
> Hi,I think your test scenario is incomplete. Read the description on
> I really like my AN1x, but i'm feeling suspicious about it.
> The ring mod feature feels too "light" to my understanding.
>
> Consider reset PRG 130 to 1:Normal and both oscillators
> using the same levels and SAW wave.
> Shouldn't it freak out when setting it's ring mod to max ?
> I can only hear a slight increase of volume !
>
> What do you think ?
p. 66 of the manual. 'The Ring Modulator combines the VCO1
and VCO2 signlas and outputs the sums and differences of the
frequency components of both inputs.' 1st of all - using the init
Normal preset provides you w/ two osc set to Saw with only a
minor differences in the Edge param. 2nd, if you check under
Mix/VCF you'll see that VCO2 Level is set to '0' - so, your ears are
not miseleading you. There is nothing to sum and output from
the preset you are using...
I suggest you alter the Pitch settings for each OSC, alter the
Edge settings and alter the Waveform selections - you'll hear a
more substantial change in timbre.
>Hold down the buttons '0', '-', and '+' while powering on the AN1x
> How do I figure out what OS is it using ?
>
to display the OS version.
> Thanks a lot,regards,
>
> juanma
>
Jon