The Yamaha AN1x Synthesizer mailing list

>>
1.  is there a bank for the editor which has all the stock plg sounds in
it?
<<

Yes, An1xEdit ships with some example banks; two of which are the Preset
defaults from the PLG150AN, the other is the factory presets from the
AN1x.
 
>>
2.  is is possible to sysex the settings data down to the editor as i
choose each patch?
<<

There is not way to perform a bulk sysex request from the PLG150AN card
;-(

Regards

Gary Gregson

Email:gary@...
http://www.yme.co.uk/yme 
 

-----Original Message-----
From: R e i d | O d a [mailto:brownboy@...] 
Sent: 01 April 2002 23:22
To: AN1x-list@yahoogroups.com
Subject: RE: [AN1x] syncronizing editor w/ plg150-an


i really appreciate the reply.  let me clarify my vague statement.

what i mean is, say i'm editing program #15 in the plg150.  when i pull
up
the editor, all of the knobs and sliders are in the their default
position, not reflecting the settings of the plg150.  as i change values
in the editor, only the settings i have changed are reflected in
the editor.  when i save the sound and try to recall it later, it will
be
incomplete.

what i would like to know is:

1.  is there a bank for the editor which has all the stock plg sounds in
it?

2.  is is possible to sysex the settings data down to the editor as i
choose each patch?

-reid

On Mon, 1 Apr 2002, Gary Gregson wrote:

> Hi Reid,
>
> An1xEdit certainly saves all the parameters correctly to the library.
So
> its not clear what your problem actually is.
>
> Note if you expect An1xEdit to save the parameters into the PLG150AN
> preset memory, then this is impossible. The presets of the card are
> stored in read only memory (ROM) and thus cannot be changed. When you
> are editing them you are doing so in the cards edit buffer. However
this
> data is lost as soon as you select another voice/
>
> You can however download the voice stored in the An1xEdit library,
> either back to the edit buffer, or to one of the card User bank
memories
> (Note that user memories will be lost only when the card is powered
> off).
>
> Regards
>
> Gary Gregson
>
> Email:gary@...
> http://www.yme.co.uk/yme
>
>
> -----Original Message-----
> From: R e i d | O d a [mailto:brownboy@...]
> Sent: 29 March 2002 21:16
> To: AN1x-list@yahoogroups.com
> Subject: [AN1x] syncronizing editor w/ plg150-an
>
>
> i know that it's possible to syncronize the display in gary gregson's
> editor to the settings in the plg150.  i'd like to edit the patches
> already in the synth, but when i make changes and save the patch in
the
> editor, it doesn't save all the parameters correctly.
>
> if there isn't a way to synchronize the two, what is the general
method
> for getting the two on the same page?
>
> thanks!
>
> -reid
>
>
>
>
>
> Community email addresses:
>   Post message: AN1x-list@yahoogroups.com
>   Subscribe:    AN1x-list-subscribe@yahoogroups.com
>   Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
>   List owner:   AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
>    http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>



Community email addresses:
  Post message: AN1x-list@yahoogroups.com
  Subscribe:    AN1x-list-subscribe@yahoogroups.com
  Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
  List owner:   AN1x-list-owner@yahoogroups.com

Shortcut URL to this page:
   http://groups.yahoo.com/group/AN1x-list
 

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/