The Yamaha AN1x Synthesizer mailing list

Sorry for the delay in replying to this thread as I have been away on
holiday

AN1xEdit saves systems parameters with each library file. The default
library file uses the AN1x machine default values. So if you want a
custom system setup then you should create your own default library with
the required parameters. Then load An1xEdit by double clicking on this
file to start the program. That way the defaults will automatically be
loaded and sent to the synth.

Regards

Gary Gregson

Email:gary@...
http://www.yme.co.uk/yme 

-----Original Message-----
From: erdem_taylan@... [mailto:erdem_taylan@...] 
Sent: 15 August 2001 23:20
To: AN1x-list@yahoogroups.com
Subject: [AN1x-list] Re: changing defaults in an1xedit

--- In AN1x-list@y..., Bruce Wahler <bruce@a...> wrote:
> Erdem,
> 
> If by " a session," you mean with AN1xEdit, you have to execute a 
System 
> Store to change the values permanently.  Otherwise, AN1x Edit will 
> overwrite them the next time you execute a Select All --> Send or 
System 
> Send, they'll be overwritten.
> 
> Regards,
> 
> -BW
> 


Basically are you saying that, if I run An1xedit and change the 
receive channel for scene 1 from its default value of 1 to say 5 and 
hit system store and exit the program, when I rerun the program 
receive channel for scene 1 should be 5 instead of 1. If that is the 
case, on my machine that does not work. Even if I do that, when I 
rerun the program the value turns back to 1. Grrrrr....

Erdem...