>Envelope or effect decay times, no doubt. No, that's not it. The reverb and echo are set to soft settings, and the VCA decay is about 10, and here's the kicker: I cannot get it to happen with normal, single-hand riffs. It requires either two hands working frantically, or palm smears, a la Hammond organ. Here's a simple test that works every time: If I put my right hand on Middle C and gliss up to high C and back down again -- no overflow. If I put the left hand on the F below Middle C and gliss both hands up to the top and back again, when I take my hands off (at around the same notes as where I started), the keyboard is actually only playing High-F/high-C at that moment, and about a half second later, it glisses down to the end notes -- even though I'm no longer touching the keys! Regards, -BW -- Bruce Wahler Design Consultant Ashby Solutions" www.ashbysolutions.com CloneWheel Support Group moderator 978.386.7389 voice 978.776.0096 fax bruce@...
Message
Re: [AN1x-list] Keyboard overflow
2001-03-15 by Bruce Wahler
Attachments
- No local attachments were found for this message.