The Yamaha AN1x Synthesizer mailing list

Hi Todd,
Have you ever used MIDIOX?  It's a great midi stream analyzer and might be
able to tell you something about your setup by just being able to identify
the raw midi signals.  You can get it at http://www.download.com and comes
highly recommended from other synth users.

Ed Edwards


----- Original Message -----
From: "tspeer" <tspeer@...>
To: <AN1x-list@yahoogroups.com>
Sent: Monday, March 05, 2001 9:29 AM
Subject: [AN1x-list] AN1x Top Note DEAD on Mac


>
> Hi Folks,
>
>     I'm wondering if any of you have seen this problem..
> The players...
>
> Beige Mac 400/G3
> Opcode Studio 128x Midi interface
> AN1x
> OMS 2.3.8
> Cubase 5.0
> External Midi Modules (the usual)
>
> The Problem....
>
>     When My AN1x is in local off- and I transmit midi thru Cubase to any
of
> my Midi Modules (and I have over 10) the very top C note on the AN1x is
not
> received by the Midi Modules.
>
> The weirdness...
>
> Every other note plays fine.
> With Local ON the AN1x plays the top C note plays fine.
> I can see the Midi received light on the Opcode interface so it it getting
> the top C note on and off command.
>
> The conclusion....
>
> sounds like a problem on the Mac right ???
>
> any insight is appreciated...
>
>
> --
>
> Todd S.
>
> Sierra Madre Cinema Council
> http://users.ev1.net/~xpander/SMCChome.html
>
>
>
> Community email addresses:
>   Post message: AN1x-list@onelist.com
>   Subscribe:    AN1x-list-subscribe@onelist.com
>   Unsubscribe:  AN1x-list-unsubscribe@onelist.com
>   List owner:   AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/AN1x-list
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>