Hello Gerry,
--- In AN1x-list@egroups.com, Mario Xavier Alvarez Tajes <xavier@i...>
wrote:
synchronize to MIDI Clock the AN1x has to be receiving the MIDI Clock
signal for the ARP/SEQ to trigger at Note On. Truth be told, I find it
annoying behavior too :-/ Same goes for the fact the ARP/SEQ won't
trigger with LOCAL=OFF. *sigh*
If I'm not mistaken, Ed has a pet peeve that there is no provision to
stop/start the ARP/SEQ Hold from an external controller (other than the
front panel button.) On the plus side, at least each scene in a voice
can have seperate trigger options - that lets you create splits or
layers with some flexibility. Overall, I like the ARP/SEQ - but Yamaha
did overlook a couple of "niceties", IMO.
*save* your AN1x Voice? Remember, the tempo parameter is saved at the
voice level - NOT globally. From your description I would hazard a
guess that the ARP/SEQ is triggering at the previous tempo not to MIDI
clock - easy enough to double check.
regards,
Jon
--- In AN1x-list@egroups.com, Mario Xavier Alvarez Tajes <xavier@i...>
wrote:
> Maybe this link is usefull for you.That's normal behaviour for the AN1x. When you set the AN1x to
>
> http://www.jdlx-musique.com/support/an1x/tt_midiclk.htm
> <http://www.jdlx-musique.com/support/an1x/tt_midiclk.htm>
>
> -----Mensaje original-----
> De: Gerry Bolda [mailto:tam_ger@h...]
> Enviado el: Viernes, 12 de Enero de 2001 07:01 p.m.
> Para: AN1x-list@egroups.com
> Asunto: [AN1x-list] problem with midi synch for the arpeg and seq function
>
>
> This should be an easy fix, but here's what's going on.
> I have a midi clock signal from either cakewalk or my 505 going into
> the AN1x. In order to play a sequence on the anx i reduce the midi
> tempo switch all the way down until it reads "midi". Now if press
> any of the keys the arp or seq I get a single note, but no sequence.
synchronize to MIDI Clock the AN1x has to be receiving the MIDI Clock
signal for the ARP/SEQ to trigger at Note On. Truth be told, I find it
annoying behavior too :-/ Same goes for the fact the ARP/SEQ won't
trigger with LOCAL=OFF. *sigh*
If I'm not mistaken, Ed has a pet peeve that there is no provision to
stop/start the ARP/SEQ Hold from an external controller (other than the
front panel button.) On the plus side, at least each scene in a voice
can have seperate trigger options - that lets you create splits or
layers with some flexibility. Overall, I like the ARP/SEQ - but Yamaha
did overlook a couple of "niceties", IMO.
>After you changed the tempor to MIDI, and before powering off, did you
> Yes i have the receive channel set to the correct setting, (not that
> it should matter for a clock signal)
>
> The only way i can get it to work is by shutting off the power and
> restarting. The settings remain, but now i can play a sequence in
> time.
*save* your AN1x Voice? Remember, the tempo parameter is saved at the
voice level - NOT globally. From your description I would hazard a
guess that the ARP/SEQ is triggering at the previous tempo not to MIDI
clock - easy enough to double check.
>HTH
> Has anyone had this problem? Is there a work around?
>
regards,
Jon