Man for some reasons my bcr2000 seems broken or al least to be revised, so for now I cannot control the an200 via sysex.
anyway, looking at your first example about the step sequencer (f0 43 10 6d 0 0 9 xx f7) , I made a comparison with roland sysex and then check the an200 manual and I noticed a mistake in the address. You wrote that "0 0 9" wich seems incomplete. Plus , at least on roland sysex it has to be considered also a check sum, dont know if this is valuable also for yamaha. Anyway I think that you should try that one: f0 43 10 6d 00 00 09 xx -maybe check sum- f7.....(check sum is given by the address + xx then divide for 128, so rewrite that result in hexadecimal...but, I repeat, I dont know if this is necessary for yamaha gear...)
Let me know if this is working
cheers
Il Dom, 21 Feb, 2016 alle 15:36, mpsfmpsfmpsf@... [AN1x-list]<AN1x-list@yahoogroups.com> ha scritto:Hi I already gave you an example
VCO1 Pitch Fine is F0 43 10 5C 10 10 19 XX F7But the AN200 doesn't send knob sysex out.