----- Original Message -----From: jammieSent: Saturday, December 21, 2013 6:58 PMSubject: Re: [AN1x] osc sync
when in sync mode osc 1 becomes a dual osc with master and slave oscwhat ever the master osc is set the slave osc waveform is set the same but resets on the starting of the osc master waveform so any modulation put on either the slave will always reset to the starting of the master osc waveformwhich is the same for most master slave oscbut the an1x in this mode also has osc 2 still which can have any waveform setand so you get a 3 osc synththis is what sets it apart as a va synth from the jp8000the master and slave osc are summed going into the mixer which is osc1 mixer input as its still only osc1----- Original Message -----From: SummaSent: Saturday, December 21, 2013 3:25 PMSubject: Re: [AN1x] osc syncThe AN1x is selfsyncing with an virtual master oscillators, therfore
its like having a 3 Oscillator synth.
Since in case of sync the master simply resets the slave waveform and
otherwise has no real purpose, typically been removed mixer wise,
it's no loss.
On 20 Dec 2013 at 4:38, jim.alciere@... wrote:
>
>
>
> I should know this: when I use Osc Sync, I know what the master
> waveform is, it's whatever I choose for vco 1. How do I know what the
> slave osc waveform is?
>
> Thank you.
>
> Jimmy
>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe:AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
>
>
>
>
--
CZ/VZ mailing list : http://groups.yahoo.com/group/CZsynth
FMHeaven mailing list : http://groups.yahoo.com/group/fmheaven/
FS1R mailing list : http://groups.yahoo.com/group/fs1r/
Vokator mailing list : http://groups.yahoo.com/group/vokator
FM-Synthesis mailing list :
http://groups.yahoo.com/group/fm-synthesis/
http://www.summasounds.de/No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6939 - Release Date: 12/21/13No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6939 - Release Date: 12/21/13
Message
Re: [AN1x] osc sync
2013-12-21 by jammie
where does he get the sin wave from
on page 61 it tells you the waves available
when vco1 is set to not sync you have available
saw pulse saw2 and mix of saw+pulse
now when sync is on
osc1 has available saw pulse innr1 innr2
innr3
now what ever the master is set to the slave will
be the same you CANT choose
a different waveform for master and
slave
slave will always be set to the waveform of the
master
unlike analog synths that you can change different
waveforms on each osc but because the vco1 is one osc
and splits into 2 it can only have the same
waveform but its outcome is the same
one of my favorite sync synths is the dss1 and the
dsm1 as you can use additive waveforms and can have different one on each osc
and set to unison you can have all 16 osc play and sync at the same time very
fat sounds