The Yamaha AN1x Synthesizer mailing list

Yes !
first reduce the gain and after trim the offset if necessary . Too much 
offset = reduced range , too much gain = excessive sensitivity.
After touch can be activated or not when you program a sound, if you 
don't need it edit your sound and remove it.
I'm a bit surprised you talk about resistors...it should be trimmers...
Cheers.
J.F.

jammie a �crit :
>
> reduce the gain
>
> and they sould be trimmers
>
> its the same after touch board as used by dx7 and all yamaha and most 
> korgs
> ----- Original Message -----
> From: j k
> To: AN1x-list@yahoogroups.com <mailto:AN1x-list%40yahoogroups.com>
> Sent: Wednesday, October 17, 2012 5:31 PM
> Subject: Re: [AN1x] About OFFSET\GAIN resistors inside
>
> Has anyone tried replacing these resistors with some thing variable so 
> that aftertouch can be re-adjusted if necessary or would it be more 
> like a resistor swap which would then redefine aftertouch based on the 
> resistors you replace them with. Anyone done this? I'm finding the 
> aftertouch way too sensitive -- its almost like all or nothing with 
> very little expression in between with my playing (albeit horrible) style.
>
> ----- Original Message -----
> From: "jammie" <jammie.emma@... 
> <mailto:jammie.emma%40blueyonder.co.uk>>
> To: AN1x-list@yahoogroups.com <mailto:AN1x-list%40yahoogroups.com>
> Sent: Wednesday, October 17, 2012 6:33:47 AM
> Subject: Re: [AN1x] About OFFSET\GAIN resistors inside
>
> its for the aftertouch
>
> its for changing the sensitivety to the players liking
>
> as its factory set as a standard but some pleople press softly other hard
>
> but if your pressing it so hard that it feals like the keys are going 
> to snap then adjust until you get the pressure you want
> ----- Original Message -----
> From: digital_plain
> To: AN1x-list@yahoogroups.com <mailto:AN1x-list%40yahoogroups.com>
> Sent: Wednesday, October 17, 2012 1:53 PM
> Subject: [AN1x] About OFFSET\GAIN resistors inside
>
> Hi guys! Can anyone tell me what this two resistors are - "gain" and 
> "offset" on the keyb. board inside the synth? I'm going to make some 
> service like replacing the battery and some capacitors, and just found 
> this additional features.
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>