The Yamaha AN1x Synthesizer mailing list

Lucio
>Anyway, is there any danger int swapping cards?   
Probably the biggest danger is physically damaging the cards when removing/inserting.  I have read elsewhere that they can be difficult to remove due to locking tabs - not tried it myself. There is unlikely to be any danger of the boards being electrically incompatible as they will all have the same contact system.

However, if you have a functional AN200 containing a PLG150-AN, and a Motif Rack containing a PLG100-DX and VL, it's not clear what is the benefit of swapping boards around to get a non-functional (non-editable, non-saleable) AN200 with DX card, and Motif with AN and VL. What are you trying to achieve?

Bill


--- In AN1x-list@yahoogroups.com, "cristoforcolombo" <sharm.band@...> wrote:
>
> Well, thank you Bill and Jammie. I'm asking this prior to swap dx and An plg's I got. Well, I have a Motif Rack classic, also, with a Dx and Vl plg's. And I would install the Dx plg into the AN200 and the 150An into the Motif. Anyway, is there any danger int swapping cards?   
> Lucio
> 
> 
>  from the An200--- In AN1x-list@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > no one knows as no one has tried it
> > 
> > but i would think that theres an os eprom that controls it and has the functions of each board to control the front panel features
> > 
> > and also the sysex implementation
> > 
> > i would get yourself a cheap module that allows 2 cards
> >   ----- Original Message ----- 
> >   From: marcus gaudio 
> >   To: AN1x-list@yahoogroups.com 
> >   Sent: Saturday, June 09, 2012 10:36 PM
> >   Subject: Re: [AN1x] Re: Hi all: is it possible to insert a PLG150-DX into a AN200?
> > 
> > 
> >     
> >   ok
> >   so it's possible or not?
> >   thanks
> > 
> >   ________________________________
> >   Da: twobeelandscape <bill@>
> >   A: AN1x-list@yahoogroups.com 
> >   Inviato: Sabato 9 Giugno 2012 17:58
> >   Oggetto: [AN1x] Re: Hi all: is it possible to insert a PLG150-DX into a AN200?
> > 
> >     
> >   Typo error, the PLG150-DX device ID should have been 01100010 62H. Anyway, the important thing is that it is different to the PLG150-AN.
> > 
> >   Bill
> > 
> >   --- In AN1x-list@yahoogroups.com, "twobeelandscape" <bill@> wrote:
> >   > 
> >   > There is a further complication in that the PLG150-AN and PLG150-DX have
> >   > different device IDs for receiving MIDI system exclusive data (01011100
> >   > 5CH and 01011100 5CH respectively). 
> > 
> >   [Non-text portions of this message have been removed]
> > 
> > 
> > 
> >   
> > 
> > [Non-text portions of this message have been removed]
> >
>