Hi !
is your backup battery too low ?
Or anything is gone wrong with the memory ? Looks like the synth is
unable to load the OS, or hangs up in some power on self test step...
Try to remove the backup battery (yes !), the RAM will be quickly empty,
then try to perform a full factory reset. (option "9" when you are in
the reset menu, it scratches and loads back everything in RAM, not only
the voices)
If it works fine replace your backup battery by a new one ...type CR2450
button battery cell.
Cheers.
J.F.
is your backup battery too low ?
Or anything is gone wrong with the memory ? Looks like the synth is
unable to load the OS, or hangs up in some power on self test step...
Try to remove the backup battery (yes !), the RAM will be quickly empty,
then try to perform a full factory reset. (option "9" when you are in
the reset menu, it scratches and loads back everything in RAM, not only
the voices)
If it works fine replace your backup battery by a new one ...type CR2450
button battery cell.
Cheers.
J.F.
> cainjosh76 a écrit : I was loading midi files with the editor and
> everything was working fine. After I was finished I turned off the
> AN1x and restart. The power came on but the screen stays stuck reading
> (Yamaha 1997). I have restarted it several times and it is still
> stuck. I tried to perform a factory reset twice by holding down 7,8,9,
> at the same time while powering up and it is still stuck. I'm at a
> lose. Can anyone help? Josh