thanks for the psu help ,...J.F you were right!! ,..the psu states i think its 12vdc but was giving a good 16 vdc,..and the wire w the printed line was the + ,......thanks for alll the help ,....it helped me hook up a cool custom eq that was part of a neve 8068 ,...
thanks again!!!!
-----Original Message-----
From: AustinGreen <austingreen@...>
To: AN1x-list@yahoogroups.com
Sent: Wed, Apr 7, 2010 9:58 pm
Subject: [AN1x] Re: MIDI Help
Hi Sorry for the dumb question. Figured it out myself by, get this, reading the manual! So if someone else ever has this problem there is a setting for the "Pattern Transmit Channel" to chose which MIDI channel to send Arp and Seq data on. Page 87 of manual. Mine was set to off by previous owner.
thanks again!!!!
-----Original Message-----
From: AustinGreen <austingreen@...>
To: AN1x-list@yahoogroups.com
Sent: Wed, Apr 7, 2010 9:58 pm
Subject: [AN1x] Re: MIDI Help
Hi Sorry for the dumb question. Figured it out myself by, get this, reading the manual! So if someone else ever has this problem there is a setting for the "Pattern Transmit Channel" to chose which MIDI channel to send Arp and Seq data on. Page 87 of manual. Mine was set to off by previous owner.
--- In AN1x-list@yahoogroups.com, "AustinGreen" <austingreen@...> wrote:
>
> Hi Group,
> I am trying to send Arp or Seq info to a Korg Poly-800 from my AN1X. I can control individual notes but when I turn on Arp or Seq nothing happens at the Korg. Same with my Foot Switch (Hold/Sustain pedal) it doesn't effect the Korg. Is it the Korg, the AN1X, or me?
> Thanks again.
>
[Non-text portions of this message have been removed]