hi,...does anyone know (on a wall wart type power supply ) regarding the 2 wires coming from the psu whether the black wire or the other wire that has a white line printed on it is the + or - line ?? i'm splicing a psu plug, to power up an eq module. thanks ahead of time -----Original Message----- From: Jeff <jf.serviere@...> To: AN1x-list@yahoogroups.com Sent: Mon, Mar 29, 2010 1:24 pm Subject: Re: [AN1x] DC in The stock power supply is rated at 12V DC- 700 mA , positive tip. If you use another one, 700 mA should be considered as a minimum, but don't exceed the voltage rating and change the plug for the right type. Similar supplies (and the right connector) can be found in electronics shops, supermarkets, computer shops... Cheers. J.F. jadestarbaby a écrit : > > Hi, > > I am wondering whether anyone knows whether the DC in for the AN1x ha > a positive tip or negative tip. It does not say on the outside of the > AN1x and i also could not find this info in the manual. Any help would > be appreciated. > > Robert H > > ------------------------------------ Community email addresses: Post message: AN1x-list@yahoogroups.com Subscribe: AN1x-list-subscribe@yahoogroups.com Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com List owner: AN1x-list-owner@yahoogroups.com Shortcut URL to this page: http://groups.yahoo.com/group/AN1x-list The AN1x Control Synthesizer FAQ:: http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm Yahoo! Groups Links [Non-text portions of this message have been removed]
Message
Re: [AN1x] general power supply question
2010-03-31 by audiomad99@aol.com