It can be done in any one of 3 ways: (1) Adjust the amount of modulation the synthesizer used to generate the sound, applies to the parameter, usually in a modulation matrix where you selected to use after touch as the source of modulation. (2) If you have a midi processor box, such as one inside the midi switch MX-8, you can take a midi parameter and scale it. Give less gain to after touch. (3) Open the AN1x if you feel proficient to do so. On the keyboard circuit board, there are 2 small pots, one for after touch gain and one for the offset value once the AT kicks in. I adjusted mine for higher sensitivity because that's how I like it.... Bob El Segundo, CA BTW - I just sold my AN1x....but still have a PLG150-AN in my CS6X.. --- In AN1x-list@yahoogroups.com, "nochtanseenspecht" <nochtanseenspecht@...> wrote: > > Greets An1xers, > Due to circumstances, i am using the an1x as master keys at the moment. > the problem is that the aftertouch seems rather sensitive.. > is there anyway to change that ? i didn't find a way so far.. > i know velocity sens can be changed, so i was hoping aftertouch too.. > thanks, david >
Message
Re: aftertouch sensitivity change ?
2009-05-18 by Bob S.