Hi,
I recently bought a used An1x.
In general, it seems to work fine, except for one strange thing:
In single mode, there seems to be extremely low polyphony
[POLY/SINGLE, ARP/SEQ=OFF]. I would except polyphony should be 10
notes, but instead, it seems to be more like 3 or so. After striking 2
keys or so, it can also happen, that even if all the sounds have
decayed, on pressing the next key no sound occurs.
This is true even after a full reset for the factory preset sounds
that come in layer mode single.
Strange enough, on setting the layer mode to [DUAL] and activating
only one scene, everything seems to be fine, so I don't really want to
return the system.
Anyone ever expirienced something similar?
I should note that on first shipping, there was some hassle with the
transport: only scratching sounds did come out... The seller did fix
the issue by himself, apparently one of the varistors was jammed by
styrofoam?!?...
Any advice on this?
Thanks a lot,
Cedrik
I recently bought a used An1x.
In general, it seems to work fine, except for one strange thing:
In single mode, there seems to be extremely low polyphony
[POLY/SINGLE, ARP/SEQ=OFF]. I would except polyphony should be 10
notes, but instead, it seems to be more like 3 or so. After striking 2
keys or so, it can also happen, that even if all the sounds have
decayed, on pressing the next key no sound occurs.
This is true even after a full reset for the factory preset sounds
that come in layer mode single.
Strange enough, on setting the layer mode to [DUAL] and activating
only one scene, everything seems to be fine, so I don't really want to
return the system.
Anyone ever expirienced something similar?
I should note that on first shipping, there was some hassle with the
transport: only scratching sounds did come out... The seller did fix
the issue by himself, apparently one of the varistors was jammed by
styrofoam?!?...
Any advice on this?
Thanks a lot,
Cedrik