The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "schmaltzberger" <docbell@...> wrote:
>
> hi,
> I am trying to get an1xedit up and running in classic mode on my ppc. 
> Unusually when I try to do a new studio setup no checkboxes appear next 
> to the port I wish to select. It recognises my tascam fw-1804 but no 
> checkbox. Any ideas?
> thanks,schmaltzberger
>

I'm not certain I understand what you're asking? 

You said "Unusually when I try to do a new studio setup no checkboxes appear next to the 
port I wish to select." 

You don't mean to say the Modem and Printer ports from the OMS Driver Search do you? 
Or do you mean from the OMS MIDI Device Setup dialog? If the latter, which is what I 
suspect, then have already connected your AN1x to the appropriate In/Out ports on the 
FW-1804 beforehand?

I don't own a FW-1804, but I did download the Tascam drivers and install them 
successfully in Classic running under 10.4.11. Under Panther, and later, if your USB MIDI 
Interface had an OS 9 capable device driver you could run OMS 2.3.8 within Classic for your 
OMS compatible applications to work with your legacy hardware. I've done this successfully 
with AN1xEdit. I've never attempted this with a Firewire MDI Interface, but it might work if 
Apple's API allows Classic to access the Firewire ports as it does the USB ports on a PPC.

Let me know how it works out for you.

Jon