The Yamaha AN1x Synthesizer mailing list

This site <http://www.zshare.net/FAQ/>

or

This site <http://rapidshare.com/en/faq.html>


...may help you avoid postal costs for the manual. I can also send a gmail
invite which allows attachments of up to 10 mb if that would help you guys
out...


On 25/11/2007, Jeff <jf.serviere@...> wrote:
>
>   Hello Nigel!
> i've found the .pdf version of the scanned repair manual, but it's too
> huge (8,5 Mo) to go through the E-mail channel. :-(
> I found it on a SIEL collector website:
> http://home.tiscali.nl/~smeyer/siel/<http://home.tiscali.nl/%7Esmeyer/siel/>
> Maybe you can contact them if they're still active? If not give me a
> post adress, i can send you a print of the file. The scan resolution is
> not very good but usable, the main board shematics should be printed in A3
> Except the famous SSM sound chips the other ICs, transistors, diodes and
> so on are "off the shelf" components. I think that the big problem
> could be the EPROM if it is now dead: you can find a blank one easily,
> but you have to get another one programmed with the SIEL µP software to
> make a copy.
> The SSM data sheets are available at :
> http://www.emulatorarchive.com/Synthesizers/SSM/ssm.htm. Another
> manufacturer of these ICs was Curtis (CEM). The ICs themselves can be
> found (at usury prices..) by : http://www.synthchips.com/sparespage.html
> or
> http://www.vintageplanet.nl/head.html
> If you sell yours, please contact me, just in case ;-)
> Cheers
> J.F.
>
> NovemberPapa a écrit :
>
> >Hi,
> >
> >
> >
> >Any info you have on the DK600 would be gratefully received.
> >
> >
> >
> >BTW, the DK600 was an updated Opera 6, some enhancements from what I
> >remember - eg weren't the Opera 6's Oscillators voltage controlled,
> whereas
> >the DK600's were digitally controlled, the change was made to improve
> tuning
> >stability.
> >
> >Also the DK600 keyboard was touch sensitive, and could be split so that
> you
> >triggered the synths internal sounds above the split point, and only sent
> >out midi note data from below the split point.
> >
> >I used to play live with a Yamaha TX7 and Korg EX800 triggered from below
> >the split point for bass sounds, while getting my DK synth, organ and
> >strings type sounds from above the split point.
> >
> >
> >
> >Hope you can find that info on the DK600/Opera 6,
> >
> >Cheers,
> >
> >Nigel
> >
> >
> >
> >
> >
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >
>
>  
>


[Non-text portions of this message have been removed]