The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "tickles88keys" 
<tickles88keys@...> wrote:
>
> I figured it out!

Congrats!

> 
> Since only one NRPN value is allowed in the BCR2000 for both the 
MSB 
> (01H) and LSB (20H) from the example above, you have to do the 
> following:
> 
> 1. Determine the decimal value of both the MSB and LSB (01 and 32, 
> respectively).
> 
> 2. Multiply the MSB (still 01) by 128, and add it to the LSB 
> (128+32=160).
> 
> 3. Enter the result (160) in the NRPN field, and the range of 
values (0-
> 127) in the corresponding Low and High Value fields.
> 
> It works well, however I'm noticing that NRPNs take longer for the 
> Motif/PLG150-AN to decode than CCs do, which can be problematic 
when 
> both controller and note information are being sent at the same 
time.  
> I guess the moral of this story is to use CCs whenever you have a 
> choice between CC and NRPN.

Hahaha LOL, agreed

> 
> Thanks again Jon for your reply...
> 
> Greg
>