The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "tickles88keys" <tickles88keys@...> wrote:
>
> --- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@> wrote:
> > Here's an example of how you might enter an NRPN string to control 
> Brightness (cutoff 
> > frequency):
> > 
> > 98	74		Non-Reg LSB
> > 99	00 		Non-Reg MSB
> > 6	0...127	Data MSB
> > 38	0...127	Data LSB
> > 
>>
> Jon,
> 
> Thanks for your reply.  I'm not sure where you're getting 74 for the 
> LSB.  Isn't it 20(Hex) or 32 according to the chart? 


32 is for Bank Select. 74 is Brightness

 Either way, I'm 
> not able to get it to work with the BCR2000 for some reason.  I think 
> that perhaps the MSB (01) isn't getting passed as such, and there's 
> no place to enter it as a stand-alone value.  Is it possible that 
> somehow the MSB and LSB are combined to form a single value (much 
> greater than 127)?  I've posted this question on the Behringer site, 
> but I haven't received a response from them...

I downloaded a copy of their JAVA app, B-Control Editor, but I don't own either hardware 
device...try this:

In the B-Control Editor, in the field for 'NRPN no.' select 98 then type 74 immediately 
following it so it reads 9874.

I believe you will have to enter 127 for the 'Maximum' value in the left hand column for the 
full range of values of 0-127.


Jon