The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "lou.kadassy" <lou.kadassy@...> wrote:
> I thought it would be easy to use a footswitch to, ahem, "switch"
> between scenes, but I haven't been able to do that.
> 
> My question is: can I use a foot switch (or continuous foot
> controller, aka volume pedal) to switch between scene 1/2? I don't
> want to morph, I just need to switch. 
> 
> Any help would be appreciated.
> 
> Lou

Yes, to both. 

On the AN1x, set the [EDIT ROTARY] Knob to the UTILITY/SETUP menu.

Press Ctrl Device until you see FS displayed.

Press Ctrl No to change the value to 3: SceneSel

Press Ctrl Device until you see SCENE displayed, the Ctrl No value should also be 3: 
SceneSel. If it's not, press Ctrl No to change the value to 3: SceneSel.

Play your sound, presee the Foot Switch (FS) to hear the 2nd Scene, release to hear the 1st 
Scene. There is no Morphing invoked when using FS.

Repeat the above procedure for using a Foot Controller (FC). Obviously, Morphing can be 
used with FC and you can have both FS and FC available simultaneously. Might get 
confusing if you use the AN1x as a Master Control Keyboard ;-)

Hope this helps.

Regards,

Jon