68300

Hello Avi,

i habe the driver package from sourceforge, but no possibility to 
build it, because i dont have the GNU-Develloping tools on my 
computer... and its always better to understand if you can play with 
the code :-) if i had a running Programm for Windows XP/2000 i would 
not write one.. and the old Dos-based BDM Software Did not work on my 
Computer or the Notebook :-(

so long

Jochen

--- In 68300@yahoogroups.com, "Avi Cohen Stuart" 
<avi.cohenstuart@s...> wrote:
> Jochen,
> 
> The BDM driver mentioned on the sourceforge.net works flawless on
> XP/2000 using giveio.sys. There is no need to write another driver. 
I
> tried on w2k to write a driver but it was a hell of job and it is 
much
> slower that using giveio.sys as is being used
> in the BDM project. I don't mind you write a driver but you might 
fall
> in the trap that you are making tools all the time (like me... got a
> '332 with the TPU already 4 years ago including the TPU assembly 
book
> but never even made a program using the TPU... yet :-) 
> 
> Avi.
> 
> > -----Original Message-----
> > From: 68300@yahoogroups.com [mailto:68300@yahoogroups.com] On 
> > Behalf Of jochen_stroebel
> > Sent: Wednesday, 14 September, 2005 10:30
> > To: 68300@yahoogroups.com
> > Subject: [68300] Re: P&E Micro CPU32 BDM Interface
> > 
> > --- In 68300@yahoogroups.com, "Aaron J. Grier" <aaron@f...> wrote:
> > > On Tue, Sep 13, 2005 at 06:53:08AM -0000, jochen_stroebel wrote:
> > > > > p&e still sells BDM interfaces for CPU32 processors.
> > > > > http://www.pemicro.com/ .
> > > > 
> > > > Yes, but for a Student ist a little expensive, if you see the
> > little
> > > > logic function the GAL has to do, perhaps someone has at 
> > least the 
> > > > pinout with the signals on the Parallel-Port-Side of the 
> > P&E Micro 
> > > > Interface for CPU32, so i can adapt my homemade PD-BDM-
Interface
> > on
> > > > Parallelportcable?
> > > 
> > > you could use the GNU debugger with your existing PD-BDM-
Interface.
> > 
> > I will do it so, if all other way fail.
> > My homemade PD-BDM Interface is not testet completely, yet 
> > and i plan to write my own litte BDM Driver for it under 
> > Windows XP/2000
> > 
> > > > > there is also a reverse-engineered schematic and source code
> > for a
> > > > > GAL to build a P&E compatible BDM interface at 
> > > > > http://sourceforge.net/projects/bdm/ .
> > > > Yes, I see but there is only the discription Motorola IDC
> > compatible
> > > > BDM cable, does it work with Codewarrior for 68k and my QUICC
> > Board
> > > > from Motorola?  (I am not complete shure the Motorola IDC
> > compatible
> > > > BDM cable ist complete equal (on parallel port side) to the
> > P&E ?!? )
> > > 
> > > the ICD32 part is/was made by P&E.  it is the same part.
> > 
> > Many thanks, this was the missing Information, I needed.  :-)
> > 
> > 
> > > > One more question, ist the Wiggler IDC compatible, too?
> > > 
> > > I do not know.
> > > 
> > > -- 
> > >   Aaron J. Grier  |   Frye Electronics, Tigard, OR   |  
aaron@f...
> > 
> > 
> > 
> > 
> > ------------------------ Yahoo! Groups Sponsor 
> > --------------------~--> Most low income households are not 
> > online. Help bridge the digital divide today!
> > http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/dN_tlB/TM
> > --------------------------------------------------------------
> > ------~-> 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> >