200e

Hi everybody.
This is just an idea, I don't know if it would be technically possible to implement.
What about extending 222e functionality adding the possibility to sequence between all busses (or portions of them), like serge TKB?
Maybe converting busses 5 and 14 into two cv inputs, the first for start/stop pulse and the second for cv speed/rate.
then an internal dsp could manage other sequencing functions, stage adressing etc... 

?

Are you suggesting a scanning track and hold which sequentially scans through the tactile sensors to determine a CV value?  This would include the ability to stop and start the scanning and control the scan rate from the tactile sensors?  Additionally, the scanner would jump to a tactile sensor when that sensor is pressed? 

That would be cool.

Matt


--- In 200e@yahoogroups.com, "buchlidian" <buchlidian@...> wrote:

>
> Hi everybody.
> This is just an idea, I don't know if it would be technically possible to implement.
> What about extending 222e functionality adding the possibility to sequence between all busses (or portions of them), like serge TKB?
> Maybe converting busses 5 and 14 into two cv inputs, the first for start/stop pulse and the second for cv speed/rate.
> then an internal dsp could manage other sequencing functions, stage adressing etc... 
> 
> ?
>