Re: [200e] 281e pulse out into 292 cv in
2009-06-07 by Kai Franz
I use it in my last patch (what i delete because i pressed the wrong button at the preset manager :-( ). I observe that after 10 min not using the 200e and start it again it took some time before the sound where at the same loudness level. Like a Attack of a ENV. Strange --- On Sun, 6/7/09, amnesia <amni56@tpg.com.au> wrote:
Show quoted textHide quoted text
From: amnesia <amni56@tpg.com.au>
Subject: Re: [200e] 281e pulse out into 292 cv in
To: 200e@yahoogroups.com
Date: Sunday, June 7, 2009, 1:52 PM
i find i prefer the sound of the 292e if i run a pulse from the 281e into the cv in of
the292e...i dont understand how you could get a nicer sound via the 281
cv out to the 292 cv in, i find it tighter with the pulse out..
am i doing any damage patching this way?
> .
>
>
[Non-text portions of this message have been removed]