200e

chris,

you're right! i thought we had 14 bits for pitchbend only, but on closer
inspection this is not the case. sorry to have passed on my misconception.

we will certainly attempt something to address this in the next 225 firmware
update.

just to reiterate, i am still quite certain that the jitter observed at the
origin of this thread was produced by a 210 or 256. a firmware solution to
that problem has been formulated.

e

On 6/13/06, wiardmodular <wiardmodular@hotmail.com> wrote:
>
>   I have a 225e with firmware version 3. I'm wondering if the
> controller busses on the 225e use the additional bit resolution for
> midi controller data at all?
>
> I have a minimoog voyager which I am using as a controller keyboard.
> You can set the modwheel on it to transmit 7 bits of controller data
> or 14.
>
> Whether I have it at 14 or 7 the stepping from the 225e is the same
> and pretty dramatic. It suggests the 225e is just not responding to
> the additional resolution.
>
> Hopefully a simple firmware update will allow the 225e to use the 14
> bit resolution transmitted by many midi controllers these days?
>
> Chris
>
>  
>


[Non-text portions of this message have been removed]