Hello,
I am looking for technical help for a Yamaha CS-80. The issue it is having is: a cluster of six notes (G2 to C3) generate full volume at all times when keyed, no matter how softly they are played. I have traced the problem to IC4 (a newer 4051 multiplexer) on the TSB circuit board, and have tested the chip with a multimeter. The INH pin 6 is not stuck high and is toggling as it should. Pin 3 (Com in/out), however, is stuck at +15V for some reason, and I can't seem to figure out why. I believe this voltage should be around 5V as initial velocity is triggered and approach 15V as the poly aftertouch is applied. I tried swapping in another 4051 from IC3, and the problem remains exclusive to the IC4 socket and the same cluster of keyboard notes. I've also checked the solder underneath for shorts and opens and compared it to the other 4051's on the board and haven't found anything out of the ordinary. Does anyone have any idea as to where I should look next? Could the IC7 (a JRC 072BD dual op-amp, also a recent replacement of the original 4558) that pin 3 goes to be involved? Could a faulty TKC board component be causing the problem? Any help would be greatly appreciated. Thanks!
Cheers,
Jonathan