Archive of the former Yahoo!Groups mailing list: Yamaha CS80

previous by date index next by date
previous in topic topic list  

Subject: Re: Another one for y'all....

From: "joachim.milson" <joachim.milson@...>
Date: 2013-05-25

Hi Tom,

I had a similar issue with one board on my CS60.
The problem was the following: the envelope of the VCF had a two states behavior, that is it jumped immediately from start level to sustain level when a key was pressed, then immediately back to start level at the release of the key. This was obvious using a panel settings with the EG-VCF sliders all the way up. Changing IC1 solved this issue.

Joachim